Hi Gary, I installed ZEND and all is working!
Thanks for all your help. Wayne On Sun, Aug 21, 2011 at 10:25 AM, Gary Banham <[email protected]> wrote: > I'm not familiar with iis I tried to play with it at one time and had > difficulty getting some things to install**** > > all I know is you need a good XMLRPC server to make the groups module work > **** > > I never could get it to with a wamp server stack**** > > I use a ZEND server community addition its free**** > > when I set up with that I had no problem**** > > perhaps there is someone out there who is more familiar with iis7 that can > give you better advice**** > > ** ** > > ** ** > > TC**** > > Gary**** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Wayne > *Sent:* Sunday, August 21, 2011 8:16 AM > > *To:* [email protected] > *Subject:* Re: [Opensim-users] Setting up groups**** > > ** ** > > I'm running iis7, don't have apache installed so I guess it's wamp without > apache.**** > > On Aug 21, 2011 10:10 AM, "Gary Banham" <[email protected]> wrote: > > I'm glad that worked it shows the Opensim config is good > > > > I place the groups folder in the root of my http server > > > > then direct my connection that way > > > > what type of web server stack are you using > > > > wamp or xamp? > > > > > > > > Gary > > > > > > > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Wayne > > Sent: Sunday, August 21, 2011 8:07 AM > > To: [email protected] > > Subject: Re: [Opensim-users] Setting up groups > > > > > > > > What's your directory structure and where exactly do you have the > > XmlRpcGroupsServer folder? > > > > > > > > > > > > On Sun, Aug 21, 2011 at 10:04 AM, Wayne <[email protected]> wrote: > > > > Worked fine!!! > > > > > > > > What's your secret? lol > > > > > > > > Wayne > > > > On Sun, Aug 21, 2011 at 9:59 AM, Gary Banham <[email protected]> wrote: > > > > ok i just checked it again and its back working > > > > > > > > Gary > > > > > > > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Wayne > > > > > > Sent: Sunday, August 21, 2011 6:23 AM > > > > To: [email protected] > > Subject: Re: [Opensim-users] Setting up groups > > > > > > > > Hi Gary, > > > > > > > > I get the same error trying to access your server. > > > > > > > > I'm out of ideas and sure hope you have a few. > > > > > > > > Thanks, > > > > Wayne > > > > > > > > > > > > 2011-08-21 08:10:48,701 ERROR - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: An error has occured while > attempting > > to access the XmlRpcGroups server method groups.getAgentActiveMembership > at > > http://209.89.51.39/XmlRpcGroupsServer/xmlrpc.php > > 2011-08-21 08:10:48,731 ERROR - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: The operation has timed out at > > System.Net.HttpWebRequest.GetRequestStream(TransportContext& context) > > at System.Net.HttpWebRequest.GetRequestStream() > > at Nwc.XmlRpc.XmlRpcRequest.Send(String url, Int32 timeout) > > at > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule.XmlRpcCall(UUID requestingAgentID, String function, Hashtable > > param) > > 2011-08-21 08:10:48,736 ERROR - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: > > 2011-08-21 08:10:48,741 WARN - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: RequestingAgentUserService :: > > 2011-08-21 08:10:48,746 WARN - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: RequestingSessionID :: > > 00000000-0000-0000-0000-000000000000 > > 2011-08-21 08:10:48,751 WARN - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: RequestingAgentID :: > > 00000000-0000-0000-0000-000000000000 > > 2011-08-21 08:10:48,755 WARN - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: AgentID :: > > c53546a1-7ead-47fb-8bb2-bead112704e2 > > 2011-08-21 08:10:48,760 WARN - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: WriteKey :: 1234 > > 2011-08-21 08:10:48,765 WARN - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: ReadKey :: 1234 > > > > On Sat, Aug 20, 2011 at 6:06 PM, Gary Banham <[email protected]> wrote: > > > > Sometimes getting things to work can be very frustrating > > > > GroupsServerURI = http://209.89.51.39/XmlRpcGroupsServer/xmlrpc.php > > > > I've set up a groups server on a small machine I have you are welcome to > try > > to connect to it and check you Opensim configuration > > > > make sure the Opensim is working then I'll try to walk you through the > > groups configuration > > > > I'll keep this url live for a few days > > > > on you server side I'll try to complete a list of things you need to do > to > > set it up > > > > > > > > TC > > > > Gary > > > > > > > > From: [email protected] > > [mailto:[email protected]] On Behalf Of Wayne > > Sent: Saturday, August 20, 2011 1:14 PM > > To: [email protected] > > Subject: Re: [Opensim-users] Setting up groups > > > > > > > > Thanks Gary but still no luck. > > > > > > > > A group gets created called new group in the groups pane, but i can not > edit > > it or get into the info area to add members or roles. > > > > > > > > In the console I noticed this error message: > > > > > > > > [XMLRPC-GROUPS-CONNECTOR]: An error has occured while attempting to > access > > the XmlRpcGroups server method groups.getAgentGroupMemberships at > > http://localhost/XmlRpcGroupsServer/xmlrpc.php > > 2011-08-20 15:06:59,044 ERROR - > > > OpenSim.Region.OptionalModules.Avatar.XmlRpcGroups.XmlRpcGroupsServicesConne > > ctorModule [XMLRPC-GROUPS-CONNECTOR]: The server committed a protocol > > violation. Section=ResponseHeader Detail=CR must be followed by LF at > > System.Net.HttpWebRequest.GetResponse() > > > > > > > > I have no idea what that means. > > > > > > > > Wayne > > > > On Sat, Aug 20, 2011 at 2:35 PM, Gary Banham <[email protected]> wrote: > > > > [Groups] > > > > ;# {Enabled} {} {Enable groups?} {true false} false > > > > ;; Enables the groups module > > > > Enabled = true > > > > > > > > ;# {Module} {Enabled:true} {Groups module to use? (Use GroupsModule to > > use Flotsam/Simian)} {} Default > > > > ;; This is the current groups stub in Region.CoreModules.Avatar.Groups. > > > > ;; All the other settings below only really apply to the > > Flotsam/SimianGrid > > > > ;; GroupsModule. > > > > ;; This module can use a PHP XmlRpc server from the Flotsam project at > > > > ;; http://code.google.com/p/flotsam/ > > > > ;; or from the SimianGrid project at > > http://code.google.com/p/openmetaverse > > > > Module = GroupsModule > > > > > > > > ;# {MessagingEnabled} {Module:GroupsModule} {Is groups messaging > > enabled?} {true false} true > > > > MessagingEnabled = true > > > > > > > > ;# {MessagingModule} {MessagingEnabled:true} {Module to use for groups > > messaging} {GroupsMessagingModule} GroupsMessagingModule > > > > MessagingModule = GroupsMessagingModule > > > > > > > > ;# {ServicesConnectorModule} {Module:GroupsModule} {Service connector to > > use for groups} {XmlRpcGroupsServicesConnector > > SimianGroupsServicesConnector} XmlRpcGroupsServicesConnector > > > > ;; Service connectors to the Groups Service as used in the GroupsModule. > > Select one depending on > > > > ;; whether you're using a Flotsam XmlRpc backend or a SimianGrid backend > > > > ServicesConnectorModule = XmlRpcGroupsServicesConnector > > > > > > > > ;# {GroupsServerURI} {Module:GroupsModule} {Groups Server URI} {} > > > > ;; URI for the groups services > > > > ;; e.g. http://yourxmlrpcserver.com/xmlrpc.php for Flotsam XmlRpc > > > > ;; or http://mygridserver.com:82/Grid/ for SimianGrid > > > > GroupsServerURI = http://xxx.xx.xx.xx/XmlRpcGroupsServer/xmlrpc.php > > > > > > > > ;# {NoticesEnabled} {Module:GroupsModule} {Enable group notices?} {true > > false} true > > > > ;; Enable Group Notices > > > > NoticesEnabled = true > > > > > > > > ;; This makes the Groups modules very chatty on the console. > > > > ; DebugEnabled = false > > > > > > > > ;; XmlRpc Security settings. These must match those set on your backend > > > > ;; groups service if the service is using these keys > > > > XmlRpcServiceReadKey = 1234 > > > > XmlRpcServiceWriteKey = 1234 > > > > > > > > this is the setup i amusing in the opensim ini file > > > > GroupServerURI points to the root of my webserver on my machine that is > > where i placed the groups module from the floatsam project > > > > basically from the XmlRpcGroupsServer file. > > > > the only thing i found is you need a server that handles XMLRPC > information > > > > i found the wamp and lamp servers did not > > > > I personally use the ZEND server comunity version but others use xamp as > > well > > > > When i changed to the server it started to work with no problem > > > > Hope this helps > > > > Additionally i have managed to get profiles and some limited search to > work > > as well > > > > > > > > TC > > > > Gary Banham > > > > > > _______________________________________________ > > Opensim-users mailing list > > [email protected] > > https://lists.berlios.de/mailman/listinfo/opensim-users > > > > > > > > > > _______________________________________________ > > Opensim-users mailing list > > [email protected] > > https://lists.berlios.de/mailman/listinfo/opensim-users > > > > > > > > > > _______________________________________________ > > Opensim-users mailing list > > [email protected] > > https://lists.berlios.de/mailman/listinfo/opensim-users > > > > > > > > > > **** > > _______________________________________________ > Opensim-users mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/opensim-users > >
_______________________________________________ Opensim-users mailing list [email protected] https://lists.berlios.de/mailman/listinfo/opensim-users
