Thanks, James- I did that (png) and got the same response- nothing, just a line
advancement in the command window.
Then I tried some new RAW files, ones I had made earlier this afternoon and
tested in Sim on a stick, Open Sim came back with "another terrain is already
loading"
So I closed the 4 regions I'm working on, and restarted them- using the latest
upgrade of Open Sim-
And I went to the Imprudence download page, got the latest Beta version 1.4,
and installed it.
Now it will let me load the RAW files from the browser, under protest- it gives
repeated error messages in red text- "could not find uploader for xfer id
5000, packet id, data length 1000" in the command window the whole time, and it
loads the terrain with some real bad gashes in it, in some cases, the
terrain profile has slipped to the other side of the sim.
The terrain tools are very sluggish, so I will restart the regions again, to
see if that clears.
I think the salient point is that Imprudence needs to be upgraded for us to use
the estate tools in the newer versions on Open Sim, but that is just conjecture
on my part.
Close to the edge-
A
________________________________
From: James Stallings II <[email protected]>
To: ANN CUDWORTH <[email protected]>; [email protected]
Sent: Sunday, March 18, 2012 7:09 PM
Subject: Re: [Opensim-users] Open Sim 0.7.4- terrain loading problems
Try using a .png format file Ann :D
Cheers
James
On Sat, Mar 17, 2012 at 3:06 PM, ANN CUDWORTH <[email protected]> wrote:
HI everyone, I am hoping someone has been able to solve this problem, because I
cannot seem to.. we just got our grid upgraded to 0.7.4, and everything seems
to be working fine, but the terrain commands.
>
>
>I am trying to terraform 4 regions- one at a time- none of the following
>methods have allowed me to make any kind of change on the terrain.
>
>
>1) uploading a grayscale jpg file to the c:\simulators\ region\bin folder -
>and using "terrain load filename.jpg"
>this returned an error message about being unable to parse the jpg file.
>
>
>2) uploading a .raw file, (one that previously worked, and I tested it in Sim
>on a Stick) into ...region\bin folder and using "terrain load filename.raw"
>This did not get any response, it simple advanced the line in the window
>
>
>Region (Aurum) # terrain load Aurum_test_soas.raw
>Region (Aurum) #
>
>
>3) uploading an OAR file of just the terrain I want to make to same
>...region\bin folder
>this OAR was made on simonastick 0.7.3 version
>- it returned this error message
>
>
>Region (Aurum) # load oar Aurum_test2.oar
>11:25:56 - [ARCHIVER]: Loading archive to region Aurum from Aurum_test2.oar
>11:25:56 - [ARCHIVER]: Loading OAR with version 0.7
>11:25:56 - [ARCHIVER]: Aborting load with error in archive file
>terrains/simonas
>tick 1.r32. System.NullReferenceException: Object reference not set to an
>instance of an object.
>
>
>I have tried to upload the RAW file from Imprudence 1.3.2. the program
>responds, says its loading the file,
>but nothing changes, even after waiting overnight.
>
>
>I can get terrain fill to work, so i have flat ground right now.
>
>
>If anyone has answer to this, I am all ears!
>Thanks for your time-
>Annabelle
>_______________________________________________
>Opensim-users mailing list
>[email protected]
>https://lists.berlios.de/mailman/listinfo/opensim-users
>
--
===================================
http://simhost.com
http://twitter.com/jstallings2
http://www.linkedin.com/pub/5/770/a49
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
