Hello, I am by no means an expert. You mentioned ports 8002-8004 are
open, but you never mentioned checking for the ports of you regions. At
least that is what I know of running my grid and how it works. I
started as a stand alone 3 years ago, and only within the last year
changed to using robust. I wish I had fiber. It will be bad here if
Cable don't get moving and at least upgrade the equipment so I can get
faster uploads then only 5.. Lucky you get 20.
InuYasha
On 5/22/2013 2:51 PM, Rob.J wrote:
Hello everyone. I do hope somebody can shed light on a problem I am having.
I successfully set up a hypergrid enabled sim last year, using SKY broadband
and it's supplied router.
The Grid and sims ran very well, and I set up 7 regions. The router
correctly NAT Looped back to allow me to log in myself, and my friends could
log in from around the world and help me build. Group module and voice were
not installed.
Noticing lag was starting to build as the sims filled with objects, I
decided to switch ISP to BT and the fibre optic Infinity option 2, which
gives me an 80mb DL / 20mb UL.
BT Supplied a home hub 3 router version A and when I first set it up, all
port forwarding was dead in the water.
However, after 7 days a firmware update arrived and some partial success has
followed. It now reports firmware as Software version 4.7.5.1.83.8.94.1.11
(Type A).
I followed the advice on one of BT's help forums for setting up port
forwarding, using the suggested static ethernet based LAN ip of 192.168.1.50
Now, bear in mind opensim worked perfectly well before switchover to new
ISP, and no changes have been made to it's files.
The dynamic ip is handled by No-Ip and again worked very well with the old
ISP.
When I boot up opensim via terminal on my iMac, I use 2 windows. First comes
the ROBUST, which loads flawlessly. A port checker reveals at end of boot
up, ports 8002 to 8004 are now open.
Now it gets muddy.
Using the second terminal window to 'mono Opensim.exe' starts the region
boot up well, but then it slows down and stalls at one point. After about a
minute the following lines appear;
19:06:39 - [FORMS]: exception occured POST
http://dreamgrid.no-ip.org:8003/accounts: The request timed out at
System.Net.HttpWebRequest.GetRequestStream () [0x00000] in <filename
unknown>:0
at OpenSim.Framework.SynchronousRestFormsRequester.MakeRequest
(System.String verb, System.String requestUrl, System.String obj) [0x00000]
in <filename unknown>:0
19:06:39 - [FORMS]: InvalidOperationException on receiving POST
http://dreamgrid.no-ip.org:8003/accounts
19:06:39 - [FORMS]: Slow request to <15> POST
http://dreamgrid.no-ip.org:8003/accounts took 100003ms, 100003ms writing,
VERSIONMIN=0&VERSIONMAX=0&METHOD=getaccount&ScopeID=00000000-0000-0000-0000-000000000000&UserID=5af7
19:06:39 - [ACCOUNT CONNECTOR]: GetUserAccount received null or empty reply
The boot up then continues, slowing now and then to report messages such as
19:08:34 - [SynchronousRestObjectRequester]: Slow request to <27> POST
http://dreamgrid.no-ip.org:8003/assets/ took 35157ms, 35017ms writing,
<?xml version="1.0" encoding="utf-8"?><AssetBase
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instan
You can see from the time stamps the amount of time lapsed and it hasnt got
to the end yet. Before on my old system the entire thing booted to the end
in less than a minute.
A couple of red lines appear, stating
19:13:34 - [WATCHDOG]: Timeout detected for thread "Heartbeat (LMF)".
ThreadState=WaitSleepJoin. Last tick was 39155ms ago.
19:13:39 - [WATCHDOG]: Timeout detected for thread "Heartbeat (Liston)".
ThreadState=WaitSleepJoin. Last tick was 5906ms ago.
The names in brackets are of course the region names.
2 final bits of info that may help solve this. The port checker reveals port
9000 is open, which is the base region, but all ports above are reporting as
closed.
Secondly, when I log in, I am just an orange cloud and cannot move at all.
Any thoughts are feedback would be very much appreciated.
--
View this message in context:
http://opensim-users.2152040.n2.nabble.com/Opensim-and-BT-home-hub-3-tp7580040.html
Sent from the opensim-users mailing list archive at Nabble.com.
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
--
________________________________________________________________________
Opensim User: In Gridmode on Version 0.7.4. Nine Instances with 56 Regions. on
Windows 7, 64-bit. Phenom 9500 2.2 GHz Quad Core, Terabyte Hard Drive, 8gig
DDR2 RAM. Used XAMPP to load PHP Version 5.3.0, Apache
and MySQL 5.1.41-community edition. Groups, Profiles, Vivox Voice and
Offline Messages all working. (Not yet Public, 10 user accounts so far).
________________________________________________________________________
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
