Allex,
I have a similar situation. Perhaps I can add some clues.
I read somewhere (& can no longer find) an explanation of the
approach used to validate incoming hypergrid viewer connections. The
main idea was that the incoming viewer IP address should match the home
grids stored IP address for that viewer. For users external to the home
grid LAN this would be the external IP address. Users residing on the
home grid LAN typically have some local LAN IP address stored rather
than the external IP address. The design is to handle this as an
acceptable exception as long as the stored viewer IP at the home grid
matches the home grid IP address.
I'm running OpenSim 0.7.6 as a stand alone hypergrid. I have two PCs
in my local LAN. If I run a viewer on the server PC I am able to jump
out to other grids. However I can't teleport home. If I run a viewer
on the non-server PC I can again jump out to other grids. In this case
I can teleport home.
There are message in my OpenSim log which I think show the values
being compared. If you can find these if might make clear what is
happening. I'll paste what I see for the two cases I've described.
When logged on local to the server PC:
Outgoing:
[USER AGENT SERVICE]: Comparing 71.89.173.18 with login IP 127.0.0.1 and
MyIP 127.0.0.1; result is true
Returning:
[USER AGENT SERVICE]: Comparing 192.168.1.1 with login IP 127.0.0.1 and
MyIP 127.0.0.1; result is false
When logged on local to a non-server PC:
Outgoing:
[USER AGENT SERVICE]: Comparing 71.89.173.18 with login IP 192.168.1.1
and MyIP 192.168.1.1; result is true
Returning:
[USER AGENT SERVICE]: Comparing 192.168.1.1 with login IP 192.168.1.1
and MyIP 192.168.1.1; result is true
I hope that's of some help.
- Gary Beck
On 11/20/2013 8:26 AM, Fleep Tuque wrote:
Likely answers to your question (but not guaranteed!) at:
http://opensim-users.2152040.n2.nabble.com/can-t-tp-home-after-hypergrid-jump-td6227904.html
http://opensim-users.2152040.n2.nabble.com/Hypergrid-Outbound-Probs-amp-HG-Address-Confusion-td6821084.html
- Chris
Chris M. Collins (Avatar: Fleep Tuque)
Center for Simulations & Virtual Environments Research (UCSIM)
UCIT Research & Development
UC Office of Information Technologies
University of Cincinnati
400 University Hall
PO Box 210658
Cincinnati, OH 45221-0658
[email protected] <mailto:[email protected]>
(513) 556-3018
http://ucsim.uc.edu
On Wed, Nov 20, 2013 at 2:12 AM, allex <[email protected]
<mailto:[email protected]>> wrote:
Hi All.
I seriously need some advice about HG TP's, I have looked around
but cant
seem to pin point my issue.
I have done the following :-
Registered a domain name and pointed its NS to no-ip NS which in
tern point
to my Dynamic IP.
Setup OSG dev.0.8.0 - running and can access the HG and TP out to
other
enabled grids.
Problem is getting home... before leaving my region I set home,
and when
trying to return to it
I get an error that the viewer could not communicate with the
server. OK. so
I have tried various other
viewers with the same result.
I thought maybe a port issue, so I tried to access my region using the
domain name from another PC
totally independant of my system and was able to log onto my region.
If i enter my domain name into the map search the system returns
"region not
found"
Any ideas anyone? I really dont know what i am missing here....
oh I have checked and re-checked the .ini files and i have only my
domain
name entered everywhere.
Thanks.
Allex
--
View this message in context:
http://opensim-users.2152040.n2.nabble.com/Help-with-Hypergrid-TP-s-please-tp7580663.html
Sent from the opensim-users mailing list archive at Nabble.com.
_______________________________________________
Opensim-users mailing list
[email protected] <mailto:[email protected]>
https://lists.berlios.de/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
_______________________________________________
Opensim-users mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/opensim-users
