> The problem is that both "pcic" and "pcmcia" drivers > have to be > updated on laptops with S10 FCS to support newer > laptops and > make sure that all 16-bit PC Cards and 32-bit CardBus > PC Cards > get properly recognized. > > Also, for laptops running with snv_13 and later (when > Advanced DDI > Interrupt Framework project was integrated) a > different set of > drivers is required again. I'm investigating if we > can include both > versions (i.e., pre- and post-snv_13) in this > distribution with > instructions on how to use them. > > - Andrei
I have the Lynnsoft Cardbus drivers - they work for Solaris 8, 9, and 10 but fail with Nevada. Will the upcoming atheros driver work with Solaris 10 and the Lynnsoft drivers which configure the Cardbus bridges (at least the older Ti PCI-cardbus bridges in an IBM A21p)? [For example, I was able to use an Intel Cardbus 100 Mbit ethernet card with Solaris 10, Lynnsoft and the Solaris iprb driver. However, with Nevada there is some error issued complaining about an old nexus driver or such and the Lynnsoft drivers fail ...] Stuart This message posted from opensolaris.org _______________________________________________ opensolaris-discuss mailing list [email protected]
