Hi James,
Thanks a lot for the information, now the skge driver works fine. It was my
mistake when I added the driver with add_drv -i , I gave the wrong ID for the
network controller (taken from prtconf).
Now since you have asked the prtpicl -v, I have added the driver for the id as
shown in the prtpicl -v.
:instance 2
:_class pci
:name pci8086,2660
pci1179,1 (obp-device, 760000010a)
:DeviceID 0
:UnitAddress 2
:device-id 17250
:vendor-id 4523
:revision-id 21
:class-code 131072
:unit-address 0
:subsystem-id 1
:subsystem-vendor-id 4473
:min-grant 0
:max-latency 0
:interrupts 1
:devsel-speed 0
:power-consumption 01 00 00 00 01 00 00 00
:model Ethernet controller
:compatible (7600000116TBL)
| pci11ab,4362.1179.1.15 |
| pci11ab,4362.1179.1 |
| pci1179,1 |
| pci11ab,4362.15 |
| pci11ab,4362 |
| pciclass,020000 |
| pciclass,0200 |
:reg
00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 02 03 00 00 00 00 00 00 00 00 00 00 00 00 00 40 00 00
18 00 02 01 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00
:assigned-addresses
10 00 02 83 00 00 00 00 00 c0 ff cd 00 00 00 00 00 40 00 00
18 00 02 81 00 00 00 00 00 ce 00 00 00 00 00 00 00 01 00 00
:pm-hardware-state needs-suspend-resume
:devfs-path /[EMAIL PROTECTED],0/pci8086,[EMAIL
PROTECTED]/pci1179,[EMAIL PROTECTED]
:driver-name skge
:binding-name pci11ab,4362.1179.1.15
:bus-addr 0
:instance 0
:_class obp-device
:name pci1179,1
--------------------------------------------------------------
This worked fine....
add_drv -i '"pci11ab,4362.1179.1.15"' skge
Thanks again....
aks
This message posted from opensolaris.org
_______________________________________________
opensolaris-discuss mailing list
[email protected]
