On 1/13/06, Benjamin J Maki <[EMAIL PROTECTED]> wrote: > Has anybody had any luck getting the LAN and AUDIO working on any of the > boards with the Nvidia NFORCE 4 MCP 410 or MCP 430 Chipsets? I've been > testing on Foxconn 6100K8MA-RS and 6150K8MA-8EKRS boards and I'm having no > luck. From what I can tell, the 6100 uses a Realtek PHY and NVidia MAC and > the 6150 uses Marvell PHY and NVIDIA MAC. The ID that comes up for the NIC > is "pci10de,0269" on both.
Do you know if these have the actual nforce ethernet or just the MCP chip used on nforce boards? I seem to recall someone else asking about a similar board with one of those ethernet controllers. On the Ultra 20 (which I think is nforce4) the nge driver comes up as "pci10de,057", and actual device comes up as a "CK804 Ethernet Controller". If that isn't what comes up for you, then you may need to get a 3rd party driver from Murayama's page or it may not work at all. Dave _______________________________________________ opensolaris-discuss mailing list [email protected]
