> > It should work on sparc. Something like 'dd > if=/dev/av/0/isoch > of=data.dv bs=32k' should capture the stream in the > raw DV format. You > should have a machine with enough RAM, the driver > uses large buffers to > keep up with a real-time 25Mbps data stream. It > depends on your > configuration, but I would say 512MB is the absolute > minimum. > I try this with express 03/06 on a sunblade 1000. Camera is recognized, data is read, but the file size shows a data rate of about 375Mbps (~2GB / 45 sec ). So something must be going wrong, I don't think the little camera could store that much on a tape.
Any suggestions where to look? This message posted from opensolaris.org _______________________________________________ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
