Hi,
I try to install Solaris on a new machine. This machine contains an IDE
controller with some Host-RAID controller - besides that you normally can still
access the controller as a plain old IDE controller.
But the BIOS has been set to enable RAID functionality (I am not able to change
the BIOS settings). So the IDE controller identifies itself as
PCI class 01-04-00 (Mass storage RAID controller)
instead of
PCI class 01-01-00 (Mass storage IDE controller)
Excerpt from "pciconf -v":
pci1166,24a (driver not attached)
Hardware properties:
name='assigned-addresses' type=int items=30
value=81017010.00000000.0000bc00.00000000.00000008.81017014.00000000.0000b880.00000000.00000004.81017018.00000000.0000b800.00000000.00000008.8101701c.00000000.0000b480.00000000.00000004.81017020.00000000.0000b400.00000000.00000020.82017024.00000000.fcafe000.00000000.00002000
name='reg' type=int items=35
value=00017000.00000000.00000000.00000000.00000000.01017010.00000000.00000000.00000000.00000008.01017014.00000000.00000000.00000000.00000004.01017018.00000000.00000000.00000000.00000008.0101701c.00000000.00000000.00000000.00000004.01017020.00000000.00000000.00000000.00000020.02017024.00000000.00000000.00000000.00002000
name='compatible' type=string items=7
value='pci1166,240.1166.24a.0' + 'pci1166,240.1166.24a'
+ 'pci1166,24a' + 'pci1166,240.0' + 'pci1166,240' + 'pciclass,010400' +
'pciclass,0104'
name='model' type=string items=1
value='RAID controller'
Is it possible for the Solaris ide driver to still attach to this device?
This message posted from opensolaris.org
_______________________________________________
opensolaris-discuss mailing list
[email protected]
