For FireWire: nope. Nothing reported from scsa1394 driver.
However after your suggestion Im able to see now: c4t0d0p0.
[EMAIL PROTECTED]>rmformat -l
Looking for devices...
1. Logical Node: /dev/rdsk/c4t0d0p0
Physical Node: /[EMAIL PROTECTED],0/pci1043,[EMAIL PROTECTED],1/[EMAIL
PROTECTED]/[EMAIL PROTECTED],0
Connected Device: Maxtor OneTouch III 0303
Device Type: Removable
Bus: USB
Size: 476.9 GB
Label: <None>
Access permissions: Medium is not write protected.
2. Logical Node: /dev/rdsk/c0t0d0p0
Physical Node: /[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL
PROTECTED]/[EMAIL PROTECTED],0
Connected Device: HL-DT-ST DVDRAM GSA-4167B DL10
Device Type: CD Reader
Bus: IDE
Size: <Unknown>
Label: <Unknown>
Access permissions: <Unknown>
Why only 500GB ? Well, I think this device has two modes of operating: RAID 0
and 1. By default it was set as RAID 0 and it was formatted as MacOS partition.
I did change that from windows to RAID 1... I will try to swtich it back to
RAID 0 and see what I get in Solaris.
big thanks for pointers about scsa2usb.conf property.
stefan
This message posted from opensolaris.org
_______________________________________________
opensolaris-discuss mailing list
[email protected]
