Chris Linton-Ford <[EMAIL PROTECTED]> writes: > Hi all, > > I am trying to get SXCR B66 running on an HP DL385 G1 with 3x300G disks > on a Smart Array 6i controller. I have managed to get the operating > system installed several times; I use the HP-supplied CPQary3 drivers > and the system appears to install fine. The only slight wrinkle is that > the /etc/inet/hosts file does not get an entry for the system's hostname > during installation, so I need to add that manually after the first > boot. Everything else works as normal. > > The problem is after about 90 minutes of uptime, the system becomes > completely unresponsive; network requests are left hanging and the > console does not echo typed characters. The console cursor is still > blinking. To reboot requires a hard reset, and after another 90 minutes > the same thing happens again. > > I have updated the system firmware for all available components to their > latest release; I have reinstalled a number of times; and I have tried > different disk configurations, but always with the same end result. I > have used the server's iLO software to generate an NMI in an attempt to > force a system reboot, but without success. I am using the latest disk > drivers from HP. > > And that's me out of ideas! Has anyone else had this problem, or can > anyone suggest further steps to get this working? I have 4 other servers > up and running B66 with no problems (2x Dell, 1xHP DL160, 1x white box).
Wasn't there something about the memory scrubber on systems like this that caused these symptoms? _______________________________________________ opensolaris-discuss mailing list opensolaris-discuss@opensolaris.org
