Here is the output of the program with usb_debug_level set to 5 -
--------------------------------------------------------------------
$./a.out
libusb debug level is 5
usb_set_debug(): Setting debugging level to 5 (on)
usb_claim_interface(): hdl=0x8062e98: interface = 0
configuration_value=1, index=0
usb_claim_interface(): hdl=0x8062e98: interface = 0, claimed by this udev=-1,
by hdl=0x0
cfg1.0.0 has 3 endpoints
ep_interface:
-1 -1 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 0 0 -1 -1 -1 -1 -1 -1 -1 -1
-1 -1 -1 -1 -1
usb_control_msg():
usb_send_msg():
requesttype 0x40
request 0x0
value 0x0
index 0x0
size 0x3
usb_do_io(): size=0xb flag=1
data dump:
00000000 40 00 00 00 00 00 03 00 01 10 00
usb_do_io(): amount=11
usb_send_msg(): rval=11
usb_control_msg(): additional 0x3 bytes
usb_interrrupt_read(): ep=0x81
usb_check_device_and_status_open(): ep=0x81 mode=0 index=17
usb_check_access(): hdl=0x8062e98 conf=1 claimed=0 alternate=0
claimed=0 ep_interface=0
cfgvalue=1
usb_check_device_and_status_open: /dev/usb/a5c.2100/0/if0in1
usb_do_io(): size=0x1000 flag=0
^C
--------------------------------------------------------------------
I need to terminate the program by pressing Ctrl-C.
Anand B
This message posted from opensolaris.org
_______________________________________________
opensolaris-discuss mailing list
[email protected]
