Dinarto wrote:
> Thanks, Mark.
>
> I'm checking the server as it's installed at customer's premises.
>
> But, have you checked section #1, whether my informations that were filled
> there are correct or not ?
>
>
There is no way for me to verify the information that you are supplying.
However, your problem has nothing to do with that information. The OBP
on the client does not recognize the network-boot-arguments variable. As
I said in my previous post, there are two possibilities:
1 - You need to update the client with a version of OBP that supports
WAN Boot. I believe you will need OBP version 4.17 or higher (or 5.0 or
higher for C-based OBP platforms).
2 - There isn't a version of OBP for the client that supports WAN Boot
and you are out of luck.
Mark
Example 11–2 Verifying OBP Support for WAN Boot on the Client
The following command shows how to check the client OBP for WAN boot
support.
# *eeprom | grep *network-boot-arguments**
*network-boot-arguments*: data not available
In this example, the output *network-boot-arguments*: data not available
indicates that the client OBP supports WAN boot.
------------------------------------------------------------------------
_______________________________________________
opensolaris-discuss mailing list
[email protected]
