This happens every time and I need to check this out on SXCE and then
Solaris 10 10/08 again to see if the issue is really hardware in some way.
Here is what happens at every boot of this Sparc machine :
1) given four SCSI disks on three SCSI ports ( two controllers )
lom>poweron
lom>
LOM event: power on
Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.27 ME, 1024 MB memory installed, Serial #12731976.
Ethernet address 8:0:20:c2:46:48, Host ID: 80c24648.
ok probe-scsi-all
/[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED],1
Target 2
Unit 0 Disk SEAGATE ST373307LSUN72G 0507
/[EMAIL PROTECTED],0/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]
Target 3
Unit 0 Disk FUJITSU MAT3073N SUN72G 0602
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]
Target 0
Unit 0 Disk SEAGATE ST373307LSUN72G 0507
Target 1
Unit 0 Disk SEAGATE ST373307LSUN72G 0507
So four more or less identical Sun OEM disks.
ok boot
Boot device: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0:a File and args:
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: add_spec: No major number for fp
Hostname: core
Reading ZFS config: done.
Mounting ZFS filesystems: (5/5)
core console login: root
Password:
Nov 26 16:35:22 core login: ROOT LOGIN /dev/console
Last login: Wed Nov 26 03:52:36 on console
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
# zpool status -x
pool: s10s
state: DEGRADED
status: One or more devices could not be opened. Sufficient replicas
exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
see: http://www.sun.com/msg/ZFS-8000-2Q
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
s10s DEGRADED 0 0 0
mirror DEGRADED 0 0 0
c0t0d0s0 ONLINE 0 0 0
c0t1d0s0 ONLINE 0 0 0
c1t3d0s0 UNAVAIL 0 0 0 cannot open
c2t2d0s0 UNAVAIL 0 0 0 cannot open
errors: No known data errors
Weird .. is there a driver or kernel module not loaded ?
Let's see what happens when I bring that disk online :
# modinfo > /tmp/modinfo.1
# zpool online s10s c1t3d0s0
# zpool status -x
all pools are healthy
# zpool status s10s
pool: s10s
state: ONLINE
scrub: resilver completed after 0h0m with 0 errors on Wed Nov 26 16:36:48
2008
config:
NAME STATE READ WRITE CKSUM
s10s ONLINE 0 0 0
mirror ONLINE 0 0 0
c0t0d0s0 ONLINE 0 0 0
c0t1d0s0 ONLINE 0 0 0
c1t3d0s0 ONLINE 0 0 0
c2t2d0s0 ONLINE 0 0 0
errors: No known data errors
# modinfo > /tmp/modinfo.2
Did some device driver get loaded ?
# diff /tmp/modinfo.1 /tmp/modinfo.2
No change there.
Everything runs fine other than this. I should point out that this is a
minimal or networked reduced core install system with only 121 packages
reported by pkginfo.
I have done this sort of thing with SXCE SNV_81 with great success and had
ZFS with zones and resource caps in place etc and it all works on a very
very small footprint. I am trying to do the same thing with Sol10u6 and
SXCE SNV_101 but got stopped in my tracks with this on S10u6 thus far. Is
this a well know bug or is something funky at play here ?
--
Dennis Clarke
ps: before anyone tears a strip off me for posting about s10u6 I can
assure you that the next step after getting this config locked down was to
reproduce it with SXCE.
_______________________________________________
opensolaris-discuss mailing list
[email protected]
