Hi all,
We've got an SXCE snv_97 filer that has been working ok for a few months
now.
Recently, it has started falling over when large amounts of data are
being copied from it. There is nothing printed to the console and I
can't find anything related in the logs. The machine doesn't respond via
the network or the console.
Copying data to the machine is fine, but from (usually) results in a hang.
There is a fault reported by "fmadm faulty" which has been asked about
on fault-discuss but they couldn't tell me what it was related to.
Attached is the fault report.
After a reboot (ouch), the data is apparently fine and scrubbing shows
no problems, the machine continues to work perfectly until the next hang.
I have no idea how to continue investigating this, so any help would be
much appreciated.
Thanks in advance
Matt Harrison
Nov 03 11:40:16 9b069e20-9ea9-6169-ff93-ede7701ef800 SUNOS-8000-1L Minor
Fault class : defect.sunos.eft.undiagnosable_problem
Description : The EFT Diagnosis Engine encountered telemetry for which it is
unable to produce a diagnosis. Refer to
http://sun.com/msg/SUNOS-8000-1L for more information.
Response : Error reports from the component will be logged for examination
by Sun.
Impact : Automated diagnosis and response for these events will not occur.
Action : Run pkgchk -n SUNWfmd to ensure that fault management software is
installed properly. Contact Sun for support.
_______________________________________________
opensolaris-discuss mailing list
[email protected]
