> Thanks for the response. Here are the files as
> requested.
> When I run Install Solaris from the desktop there are
> no drive or partition selections so I can't complete
> the install. I have a 200GB Seagate drive attached to
> the onboard SATA controller.
And that's apparently a VIA chipset SATA controller:
pci bus 0x0000 cardnum 0x0f function 0x00: vendor 0x1106 device 0x3149
VIA Technologies, Inc. VIA VT6420 SATA RAID Controller
I think that VIA SATA controllers are not supported by Solaris,
similar to this bug:
Bug ID 6411071
Synopsis sata hdd is not recognised during install.
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6411071
Is there a BIOS setting to disable the RAID mode of the VIA chipset
SATA controller? Try to set the controller to P-ATA legacy mode,
or maybe AHCI mode; that should be supported by OpenSolaris.
--
This message posted from opensolaris.org
_______________________________________________
opensolaris-discuss mailing list
[email protected]
