Thanks for that. I had the LSI adapter boot support disabled so there was only hd0 ... hd4. The issues seems to be the HP E200. It does not complete (hd1, / (hd2, or (hd3,. I need to work out how to disable it.
Thank you heaps for helping to diagnose this issue. The HP E200 controller is not a particularly nice card, there is no pass through mode - only RAID as single drives, this is probably what is causing the issue. I will probably replace it. This might be a good issue to write up as a wiki / help page. I would be willing to do so if I knew where. Another feature that might be a good idea is the option on beadm (or equivalent) to set verbose boot mode - where should I suggest this? Thanks, Kim. -- This message posted from opensolaris.org _______________________________________________ opensolaris-discuss mailing list [email protected]
