Hi,
On Thu, Mar 18, 2010 at 02:20:17AM -0700, Karel Gardas wrote:
> Hello,
> so no, the issue is not somewhere else, but it's directly on the solaris and
> it happens on both b134 and b111b (OS 2009.06).
> The issue is this: OS runs on Lenovo T500 which provides wifi card and
> e1000g0 card. When I boot and let OS boot without cable pluged into the
> e1000g connector then network (routing!) will not work. I'm able to ping
> machines on network (10.0.0.*), but routing will not work. For example ping
> complains with `no route to host' message (when I ping something outside). As
> I said, this happen on both b111b and b134. Now, I've not found it that
> quickly since normally I came to office, put notebook on desk, plug network
> cable to the e1000g0 connector and switch on and boot the OS. If I do this,
> then network including routing works as expected.
> To me this looks like an issue in nwamd or something of that kind. I'm using
> defaultrouter configuration i.e.
> ka...@thinkpad:~$ cat /etc/defaultrouter
> 10.0.0.138
> ka...@thinkpad:~$
>
> Now, the question is if this is already reported somewhere or if I shall
> report it myself.
> Thanks,
> Karel
> PS: general note: b134 looks really nice, much better than 133/132. Thanks
> for this!
Try to use old-good physical:default instead of the
physical:nwam in case you have static network configuration on
your box.
/lib/svc/method/net-nwam -u
.. then check your static configuration and (fast-)reboot.
/j.
_______________________________________________
opensolaris-discuss mailing list
[email protected]
