Hi Mike, do the 2 drives work when you connect them directly to your computer (without the hub)?
It sounds silly but I had a similar issue and it took me a while to find out that the USB hub was the problem (cheap 5 Euro hub). In my case I wasn't able to use my USB-memory sticks with my hub. OpenSolaris recognised there was something attached but did not mount the drives. After a lot of trying I replaced the HUB and suddenly everything was working fine. As a side effect OpenSolaris was booting a lot faster then. Also try the driver utility to find out if there is a problem. Normally the utility is quite fast in detecting your hardware. If it takes a long time (minutes instead of seconds) try it without the USB-hub. just an idea Lars -- This message posted from opensolaris.org
