J?rgen Keil wrote: >>> What is the pci vendor and device id for your adaptec 2940 card? >>> (check scanpci -v output) >> pci bus 0x0003 cardnum 0x06 function 0x00: vendor 0x9004 device 0x8178 > >>> SX:CE supports these devices with the cadp driver: >>> # grep "^cadp " /etc/driver_aliases >> Looks like a vendor/device mismatch. > > Yep, "cadp" is the wrong driver; we need "adp". > Again, this driver is not available as 64-bit driver. > And it's probably missing in OpenSolaris. > In SX:CE it's part of the SUNWadp package. > > % grep "^adp " /etc/driver_aliases > adp "pci9004,7078" > adp "pci9004,7178" > adp "pci9004,7278" > adp "pci9004,7478" > adp "pci9004,7578" > adp "pci9004,8078" > adp "pci9004,8178" <<<<<< > adp "pci9004,8278" > adp "pci9004,8478" > adp "pci9004,8578" > adp "pci9004,5078" > adp "pci9004,5578" > adp "pci9004,6078" > adp "pci9004,6075" > adp "pci9004,6178" > adp "pci9004,6278" > adp "pci9004,7860" > adp "pci9004,7880" > adp "pci9004,7881" > adp "pci9004,7884" > adp "pci9004,7891" > adp "pci9004,7892" > adp "pci9004,7895"
Success!!! I installed the adp driver and it works in 32-bit mode. The controller and the tape drive attached to it is recognized. -- Michael Eager eager at eagercon.com 1960 Park Blvd., Palo Alto, CA 94306 650-325-8077
