If you have disks attached to the controller, have you tried running 'format' to enumerate available devices? I didn't realize my Syba3114 controller was working until I did this under nv63. I had been trying to see the device with cfgadm, but it wasn't showing up (maybe because, since I'm using Solaris, I'd flashed the controller with the JBOD bios).
cheers, Blake On 5/16/07, Austin McKinley <amckinle at andrew.cmu.edu> wrote: > >From what I've read, this controller should come up fine under Solaris, but > >I'm so new to this that I'm not even sure if it's being detected. Can > >someone tell me what I'm missing? See dmesg output below: > > > Wed May 16 16:43:29 EDT 2007 > May 13 04:14:49 liz syslogd: going down on signal 15 > May 13 04:14:50 liz rpcbind: [ID 564983 daemon.error] rpcbind terminating on > signal. > May 13 04:15:00 liz genunix: [ID 672855 kern.notice] syncing file systems... > May 13 04:15:00 liz genunix: [ID 904073 kern.notice] done > May 13 04:15:49 liz genunix: [ID 540533 kern.notice] ^MSunOS Release 5.10 > Version Generic_118855-33 32-bit > May 13 04:15:49 liz genunix: [ID 172907 kern.notice] Copyright 1983-2006 Sun > Microsystems, Inc. All rights reserved. > May 13 04:15:49 liz Use is subject to license terms. > May 13 04:15:49 liz unix: [ID 126719 kern.info] features: > 100ffdf<cpuid,htt,sse2,sse,sep,pat,cx8,pae,mca,mmx,cmov,pge,mtrr,msr,tsc,lgpg> > May 13 04:15:49 liz unix: [ID 168242 kern.info] mem = 1048124K (0x3ff8f000) > May 13 04:15:49 liz rootnex: [ID 466748 kern.info] root nexus = i86pc > May 13 04:15:49 liz rootnex: [ID 349649 kern.info] pseudo0 at root > May 13 04:15:49 liz genunix: [ID 936769 kern.info] pseudo0 is /pseudo > May 13 04:15:49 liz rootnex: [ID 349649 kern.info] scsi_vhci0 at root > May 13 04:15:49 liz genunix: [ID 936769 kern.info] scsi_vhci0 is /scsi_vhci > May 13 04:15:49 liz rootnex: [ID 349649 kern.info] isa0 at root > May 13 04:15:49 liz pcplusmp: [ID 736762 kern.info] pcplusmp: vector 0x9 > ioapic 0x2 intin 0x9 is bound to cpu 1 > May 13 04:15:49 liz rootnex: [ID 349649 kern.info] pci0 at root: space 0 > offset 0 > May 13 04:15:49 liz genunix: [ID 936769 kern.info] pci0 is /pci at 0,0 > May 13 04:15:49 liz pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) > instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 0 > May 13 04:15:49 liz pcplusmp: [ID 637496 kern.info] pcplusmp: ide (ata) > instance 0 vector 0xe ioapic 0x2 intin 0xe is bound to cpu 1 > May 13 04:15:49 liz genunix: [ID 640982 kern.info] ATAPI device at targ > 0, lun 0 lastlun 0x0 > May 13 04:15:49 liz genunix: [ID 846691 kern.info] model JLMS XJ-HD166S > May 13 04:15:49 liz genunix: [ID 479077 kern.info] ATA/ATAPI-5 > supported, majver 0x20 minver 0x0 > May 13 04:15:49 liz genunix: [ID 640982 kern.info] IDE device at targ 1, > lun 0 lastlun 0x0 > May 13 04:15:49 liz genunix: [ID 846691 kern.info] model WDC > WD2000JB-00FUA0 > May 13 04:15:49 liz genunix: [ID 479077 kern.info] ATA/ATAPI-6 > supported, majver 0x7e minver 0x0 > May 13 04:15:49 liz genunix: [ID 228648 kern.info] ata_set_feature: > (0x66,0x0) failed > May 13 04:15:49 liz pci: [ID 370704 kern.info] PCI-device: ide at 0, ata0 > May 13 04:15:49 liz genunix: [ID 936769 kern.info] ata0 is /pci at > 0,0/pci-ide at 1f,1/ide at 0 > May 13 04:15:49 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:15:49 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:15:49 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:15:49 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:15:49 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:15:49 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:15:49 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:15:49 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:15:49 liz genunix: [ID 773945 kern.info] UltraDMA mode 5 > selected > May 13 04:15:49 liz gda: [ID 243001 kern.info] Disk0: <Vendor 'Gen-ATA ' > Product 'WDC WD2000JB-00F'> > May 13 04:15:49 liz ata: [ID 496167 kern.info] cmdk0 at ata0 target 1 lun 0 > May 13 04:15:49 liz genunix: [ID 936769 kern.info] cmdk0 is /pci at > 0,0/pci-ide at 1f,1/ide at 0/cmdk at 1,0 > May 13 04:15:49 liz unix: [ID 190185 kern.info] SMBIOS v2.3 loaded (2685 > bytes) > May 13 04:15:49 liz pseudo: [ID 129642 kern.info] pseudo-device: dld0 > May 13 04:15:49 liz genunix: [ID 936769 kern.info] dld0 is /pseudo/dld at 0 > May 13 04:15:50 liz pci: [ID 370704 kern.info] PCI-device: pci8086,244e at > 1e, pci_pci2 > May 13 04:15:50 liz genunix: [ID 936769 kern.info] pci_pci2 is /pci at > 0,0/pci8086,244e at 1e > May 13 04:15:50 liz pcplusmp: [ID 637496 kern.info] pcplusmp: i8042 (i8042) > instance 0 vector 0x1 ioapic 0x2 intin 0x1 is bound to cpu 0 > May 13 04:15:50 liz pcplusmp: [ID 398438 kern.info] pcplusmp: i8042 (i8042) > instance #0 vector 0xc ioapic 0x2 intin 0xc is bound to cpu 0 > May 13 04:15:50 liz i8042: [ID 526150 kern.info] 8042 device: keyboard at 0, > kb8042 # 0 > May 13 04:15:50 liz genunix: [ID 936769 kern.info] kb80420 is /isa/i8042 at > 1,60/keyboard at 0 > May 13 04:15:50 liz pcplusmp: [ID 637496 kern.info] pcplusmp: pciclass,0c0300 > (uhci) instance 0 vector 0x10 ioapic 0x2 intin 0x10 is bound to cpu 1 > May 13 04:15:51 liz pci: [ID 370704 kern.info] PCI-device: pci8086,2480 at > 1d, uhci0 > May 13 04:15:51 liz genunix: [ID 936769 kern.info] uhci0 is /pci at > 0,0/pci8086,2480 at 1d > May 13 04:15:52 liz unix: [ID 950921 kern.info] cpu0: x86 (chipid 0x0 > GenuineIntel family 15 model 2 step 9 clock 2400 MHz) > May 13 04:15:52 liz unix: [ID 950921 kern.info] cpu0: Intel(r) Xeon(tm) CPU > 2.40GHz > May 13 04:15:52 liz unix: [ID 950921 kern.info] cpu1: x86 (chipid 0x0 > GenuineIntel family 15 model 2 step 9 clock 2400 MHz) > May 13 04:15:52 liz unix: [ID 950921 kern.info] cpu1: Intel(r) Xeon(tm) CPU > 2.40GHz > May 13 04:15:54 liz unix: [ID 557827 kern.info] cpu1 initialization complete > - online > May 13 04:15:54 liz rootnex: [ID 349649 kern.info] iscsi0 at root > May 13 04:15:54 liz genunix: [ID 936769 kern.info] iscsi0 is /iscsi > May 13 04:15:54 liz usba: [ID 912658 kern.info] USB 2.0 device (usb46d,c00e) > operating at low speed (USB 1.x) on USB 1.10 root hub: mouse at 1, hid0 at > bus address 2 > May 13 04:15:54 liz usba: [ID 349649 kern.info] Logitech USB-PS/2 > Optical Mouse > May 13 04:15:54 liz genunix: [ID 936769 kern.info] hid0 is /pci at > 0,0/pci8086,2480 at 1d/mouse at 1 > May 13 04:15:54 liz genunix: [ID 408114 kern.info] /pci at 0,0/pci8086,2480 > at 1d/mouse at 1 (hid0) online > May 13 04:16:04 liz pci: [ID 370704 kern.info] PCI-device: pci8086,2543 at 2, > pci_pci0 > May 13 04:16:04 liz genunix: [ID 936769 kern.info] pci_pci0 is /pci at > 0,0/pci8086,2543 at 2 > May 13 04:16:04 liz pci_pci: [ID 370704 kern.info] PCI-device: pci8086,1460 > at 1d, pci_pci5 > May 13 04:16:04 liz genunix: [ID 936769 kern.info] pci_pci5 is /pci at > 0,0/pci8086,2543 at 2/pci8086,1460 at 1d > May 13 04:16:04 liz mac: [ID 543131 kern.info] NOTICE: e1000g0/0 registered > May 13 04:16:04 liz pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,1011 > (e1000g) instance 0 vector 0x30 ioapic 0x4 intin 0x0 is bound to cpu 0 > May 13 04:16:04 liz e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network > Connection, Driver Ver. 5.0.11 > May 13 04:16:05 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:16:05 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:16:05 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:16:05 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:16:05 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:16:05 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:16:05 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:16:05 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:16:05 liz genunix: [ID 773945 kern.info] UltraDMA mode 5 > selected > May 13 04:16:05 liz genunix: [ID 454863 kern.info] dump on /dev/dsk/c0d1s1 > size 525 MB > May 13 04:16:06 liz pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,1229 > (iprb) instance 0 vector 0x13 ioapic 0x2 intin 0x13 is bound to cpu 1 > May 13 04:16:06 liz genunix: [ID 678236 kern.info] Ethernet address = > 0:e0:81:25:af:e7 > May 13 04:16:06 liz gld: [ID 944156 kern.info] iprb0: Intel 82558/82559 Ver > 0.010.6 Driver: type "ether" mac address 00:e0:81:25:af:e7 > May 13 04:16:06 liz pci_pci: [ID 370704 kern.info] PCI-device: pci8086,1040 > at 1, iprb0 > May 13 04:16:06 liz genunix: [ID 936769 kern.info] iprb0 is /pci at > 0,0/pci8086,244e at 1e/pci8086,1040 at 1 > May 13 04:16:07 liz pseudo: [ID 129642 kern.info] pseudo-device: zfs0 > May 13 04:16:07 liz genunix: [ID 936769 kern.info] zfs0 is /pseudo/zfs at 0 > May 13 04:16:07 liz e1000g: [ID 801593 kern.notice] NOTICE: pci8086,1011 - > e1000g[0] : Adapter 1000Mbps full duplex copper link is up. > May 13 04:16:08 liz pseudo: [ID 129642 kern.info] pseudo-device: pm0 > May 13 04:16:08 liz genunix: [ID 936769 kern.info] pm0 is /pseudo/pm at 0 > May 13 04:16:08 liz pseudo: [ID 129642 kern.info] pseudo-device: power0 > May 13 04:16:08 liz genunix: [ID 936769 kern.info] power0 is /pseudo/power at > 0 > May 13 04:16:08 liz pseudo: [ID 129642 kern.info] pseudo-device: devinfo0 > May 13 04:16:08 liz genunix: [ID 936769 kern.info] devinfo0 is > /pseudo/devinfo at 0 > May 13 04:16:13 liz rootnex: [ID 349649 kern.info] xsvc0 at root > May 13 04:16:13 liz genunix: [ID 936769 kern.info] xsvc0 is /xsvc > May 13 04:16:15 liz pci_pci: [ID 370704 kern.info] PCI-device: pci8086,1460 > at 1f, pci_pci6 > May 13 04:16:15 liz genunix: [ID 936769 kern.info] pci_pci6 is /pci at > 0,0/pci8086,2543 at 2/pci8086,1460 at 1f > May 13 04:16:18 liz pseudo: [ID 129642 kern.info] pseudo-device: vol0 > May 13 04:16:18 liz genunix: [ID 936769 kern.info] vol0 is /pseudo/vol at 0 > May 13 04:16:19 liz pci: [ID 370704 kern.info] PCI-device: pci8086,2545 at 3, > pci_pci1 > May 13 04:16:19 liz genunix: [ID 936769 kern.info] pci_pci1 is /pci at > 0,0/pci8086,2545 at 3 > May 13 04:16:19 liz pseudo: [ID 129642 kern.info] pseudo-device: pseudo1 > May 13 04:16:19 liz genunix: [ID 936769 kern.info] pseudo1 is > /pseudo/zconsnex at 1 > May 13 04:16:19 liz pci_pci: [ID 370704 kern.info] PCI-device: pci8086,1460 > at 1d, pci_pci3 > May 13 04:16:19 liz genunix: [ID 936769 kern.info] pci_pci3 is /pci at > 0,0/pci8086,2545 at 3/pci8086,1460 at 1d > May 13 04:16:19 liz pci_pci: [ID 370704 kern.info] PCI-device: pci8086,1460 > at 1f, pci_pci4 > May 13 04:16:19 liz genunix: [ID 936769 kern.info] pci_pci4 is /pci at > 0,0/pci8086,2545 at 3/pci8086,1460 at 1f > May 13 04:16:19 liz pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024 > May 13 04:16:19 liz genunix: [ID 936769 kern.info] ramdisk1024 is > /pseudo/ramdisk at 1024 > May 13 04:16:23 liz pseudo: [ID 129642 kern.info] pseudo-device: lockstat0 > May 13 04:16:23 liz genunix: [ID 936769 kern.info] lockstat0 is > /pseudo/lockstat at 0 > May 13 04:16:23 liz pseudo: [ID 129642 kern.info] pseudo-device: llc10 > May 13 04:16:23 liz genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1 at 0 > May 13 04:16:23 liz pseudo: [ID 129642 kern.info] pseudo-device: fcsm0 > May 13 04:16:23 liz genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm at 0 > May 13 04:16:23 liz pseudo: [ID 129642 kern.info] pseudo-device: lofi0 > May 13 04:16:23 liz genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi at 0 > May 13 04:16:23 liz pseudo: [ID 129642 kern.info] pseudo-device: profile0 > May 13 04:16:23 liz genunix: [ID 936769 kern.info] profile0 is > /pseudo/profile at 0 > May 13 04:16:24 liz pseudo: [ID 129642 kern.info] pseudo-device: systrace0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] systrace0 is > /pseudo/systrace at 0 > May 13 04:16:24 liz scsi: [ID 193665 kern.info] sd0 at ata0: target 0 lun 0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] sd0 is /pci at 0,0/pci-ide > at 1f,1/ide at 0/sd at 0,0 > May 13 04:16:24 liz pseudo: [ID 129642 kern.info] pseudo-device: fbt0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt at 0 > May 13 04:16:24 liz genunix: [ID 314293 kern.info] device pciclass,030000 at > 2(display#0) keeps up device sd at 0,0(sd#0), but the latter is not power > managed > May 13 04:16:24 liz pseudo: [ID 129642 kern.info] pseudo-device: sdt0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt at 0 > May 13 04:16:24 liz pseudo: [ID 129642 kern.info] pseudo-device: fasttrap0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] fasttrap0 is > /pseudo/fasttrap at 0 > May 13 04:16:24 liz pseudo: [ID 129642 kern.info] pseudo-device: fssnap0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap > at 0 > May 13 04:16:24 liz pseudo: [ID 129642 kern.info] pseudo-device: winlock0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] winlock0 is > /pseudo/winlock at 0 > May 13 04:16:24 liz pseudo: [ID 129642 kern.info] pseudo-device: rsm0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm at 0 > May 13 04:16:24 liz pseudo: [ID 129642 kern.info] pseudo-device: pool0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] pool0 is /pseudo/pool at 0 > May 13 04:16:24 liz ipf: [ID 774698 kern.info] IP Filter: v4.0.3, running. > May 13 04:16:24 liz pseudo: [ID 129642 kern.info] pseudo-device: dtrace0 > May 13 04:16:24 liz genunix: [ID 936769 kern.info] dtrace0 is /pseudo/dtrace > at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: devinfo0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] devinfo0 is > /pseudo/devinfo at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: ramdisk1024 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] ramdisk1024 is > /pseudo/ramdisk at 1024 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: llc10 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1 at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: fcp0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: fcsm0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: lofi0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: fssnap0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] fssnap0 is /pseudo/fssnap > at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: winlock0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] winlock0 is > /pseudo/winlock at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: vol0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] vol0 is /pseudo/vol at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: pm0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] pm0 is /pseudo/pm at 0 > May 13 04:16:25 liz pseudo: [ID 129642 kern.info] pseudo-device: rsm0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm at 0 > May 13 04:16:25 liz pcplusmp: [ID 637496 kern.info] pcplusmp: pci8086,1229 > (iprb) instance 0 vector 0x13 ioapic 0x2 intin 0x13 is bound to cpu 0 > May 13 04:16:25 liz gld: [ID 944156 kern.info] iprb0: Intel 82558/82559 Ver > 0.010.6 Driver: type "ether" mac address 00:e0:81:25:af:e7 > May 13 04:16:25 liz pci_pci: [ID 370704 kern.info] PCI-device: pci8086,1040 > at 1, iprb0 > May 13 04:16:25 liz genunix: [ID 936769 kern.info] iprb0 is /pci at > 0,0/pci8086,244e at 1e/pci8086,1040 at 1 > May 13 04:16:26 liz mac: [ID 543131 kern.info] NOTICE: e1000g1/0 registered > May 13 04:16:26 liz pcplusmp: [ID 398438 kern.info] pcplusmp: pci8086,1011 > (e1000g) instance #1 vector 0x31 ioapic 0x4 intin 0x1 is bound to cpu 0 > May 13 04:16:26 liz e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 Network > Connection, Driver Ver. 5.0.11 > May 13 04:16:26 liz rootnex: [ID 349649 kern.info] xsvc0 at root > May 13 04:16:26 liz genunix: [ID 936769 kern.info] xsvc0 is /xsvc > May 13 04:16:31 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:16:31 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:16:31 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:16:31 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:16:31 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:16:31 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:16:31 liz genunix: [ID 935449 kern.info] ATA DMA off: > disabled. Control with "atapi-cd-dma-enabled" property > May 13 04:16:31 liz genunix: [ID 882269 kern.info] PIO mode 4 selected > May 13 04:16:31 liz genunix: [ID 773945 kern.info] UltraDMA mode 5 > selected > May 13 04:16:31 liz scsi: [ID 193665 kern.info] sd0 at ata0: target 0 lun 0 > May 13 04:16:31 liz genunix: [ID 936769 kern.info] sd0 is /pci at 0,0/pci-ide > at 1f,1/ide at 0/sd at 0,0 > May 13 04:16:31 liz genunix: [ID 314293 kern.info] device pciclass,030000 at > 2(display#0) keeps up device sd at 0,0(sd#0), but the latter is not power > managed > May 13 04:16:47 liz java[567]: [ID 807473 user.error] pkcs11_softtoken: > Keystore version failure. > > Thanks, > Austin > > > This message posted from opensolaris.org > _______________________________________________ > opensolaris-help mailing list > opensolaris-help at opensolaris.org >
