On Wed, 2007-11-07 at 13:07 +0400, sailesh wrote:
> Hi Tim,
Er, hi there.
> i have already configure ZFS filesystem. everything work fine as expected.
>
> I have only one isssue, if you can help.
>
> I want to transfer file from ZFS file system to UFS file system. How can i
> do that.
cp, cpio, tar, mv -- lots of utilities can do this for you.
> i have read we cannot use ufsdump for this. The zfs send / receive could be
> used or is there any equivalent.
Right. Perhaps something like this:
# cd /ufs-dir
# find . | cpio -pvdum /zfs-dir
cheers,
tim
> Kind regards,
>
> Sailesh Mohabeer
> Systems Administrator
> Mauritius Network Services
> 2nd Floor C&R Court,
> Labourdonnais Street,
> Port Louis.
> Tel: (230) 211 5228
> Fax: (230) 211 2414
>
> ----- Original Message -----
> From: "Tim Foster" <Tim.Foster at Sun.COM>
> To: "Preethivirajsingh Sailesh Mohabeer" <sailesh.mohabeer at mns.intnet.mu>
> Cc: "opensolaris-help" <opensolaris-help at opensolaris.org>
> Sent: Tuesday, October 23, 2007 5:13 PM
> Subject: Re: [osol-help] ZFS RaidZ
>
>
> > Hi there,
> >
> > On Tue, 2007-10-23 at 03:51 -0700, Preethivirajsingh Sailesh Mohabeer
> > wrote:
> >> I have installed solaris 10 with ZFS as filesystem. I am using the
> >> Server as an application server. As you all know we cannot boot root
> >> filesystem from ZFS, i have mirror my root and swap file system. i
> >> have created two mirror metadevice on two disks. Furthermore, i have
> >> created file system using ZFS using two disks. I have used RAIDZ with
> >> the two disk.
> >>
> >> What i want to What will happen to my application if one disk fail in
> >> the RaidZ.
> >
> > Why are you using a 2 disk RAID-Z instead of a mirror ?
> >
> > But regardless, you should be able to still run with one failed disk in
> > your raidz set.
> >
> > More at:
> > http://docs.sun.com/app/docs/doc/819-5461/6n7ht6qrs?a=view#gamtu
> > http://www.solarisinternals.com/wiki/index.php/ZFS_Best_Practices_Guide#RAID-Z_Configuration_Requirements_and_Recommendations
> >
> > Remember, you can always experiment around with pool configurations
> > using files, eg. here's me creating a small pool, writing a 20mb file,
> > checking it's contents, damaging one of the devices the redundant pool
> > is made of, scrubbing to detect errors, and then checking to see if the
> > file has survived:
> >
> > # mkfile 64m /tmp/file1
> > # mkfile 64m /tmp/file2
> > # zpool create raidz mypool /tmp/file1 /tmp/file2
> > # digest -a md5 file
> > # cd /pool
> > # dd if=/dev/urandom of=file bs=1024k count=20
> > # mkfile /tmp/file2
> > # zpool scrub pool
> > # zpool status -v pool
> > # cd /pool
> > # digest -a md5 file
> >
> > cheers,
> > tim
> >
> > --
> > Tim Foster, Sun Microsystems Inc, Solaris Engineering Ops
> > http://blogs.sun.com/timf
>
--
Tim Foster, Sun Microsystems Inc, Solaris Engineering Ops
http://blogs.sun.com/timf
