hello,
I have lately installed OpenSolaris 2008.11 on my optiplex 745. Everything 
worked pretty much ok, apart from the fact that  system can't recognize the 
second sata disk I have connected after installation.
I have also realized that system is using ata module instead of sata one:

[5]elsinore:~>modinfo |grep disk
 53 fffffffff795f000  10e40 258   1  ata (ATA AT-bus attachment disk cont)

installed chipset (intel 82801H) is reported to be working.

How can  I have my second disk discovered? devfsadm didn't help, neither did  
touch /reconfigre; init 6 .. 

Physical connection is ok, linux instlled previously on this box had no problem 
utilizing both sata devices..

one more thing -- cfgadm output contains only usb related lines.. weired..

root at elsinore:~# cfgadm 
Ap_Id                          Type         Receptacle   Occupant     Condition
usb2/1                         unknown      empty        unconfigured ok
usb2/2                         unknown      empty        unconfigured ok
usb3/1                         unknown      empty        unconfigured ok
usb3/2                         unknown      empty        unconfigured ok
usb4/1                         unknown      empty        unconfigured ok
usb4/2                         unknown      empty        unconfigured ok
usb4/3                         unknown      empty        unconfigured ok
usb4/4                         usb-storage  connected    configured   ok
usb5/1                         unknown      empty        unconfigured ok
(an so on...)
-- 
This message posted from opensolaris.org

Reply via email to