Hi!
I have upgraded my 2008.10 install to 2009.06 but after the reboot I get a
kernel panic.
The system is self build, Mainboard A8V-MX, 2GB RAM, 2* SAMSUNG HD 400 GB,
Compaq NC3120 NIC (intel based). It is used as file server therefore it uses
onboard graphics in text mode.
I have captured the kernel panic with a serial console, it is attached to this
message.
What I have tried so far:
- replaced the onboard graphics with a S3 Unichrome Pro VGA Adapter
- looked into he hcl and found the A8V-MX not listed
- asked google with no helpful results
Any hints what else I could try?
cheerio
steve
--
This message posted from opensolaris.org
-------------- next part --------------
cpu0: x86 (AuthenticAMD 20FF2 family 15 model 47 step 2 clock 2200 MHz)
cpu0: AMD Athlon(tm) 64 Processor 3500+
workaround applied for cpu erratum #121
PCI-device: pci1106,287b at 13, pci_pci1
pci_pci1 is /pci at 0,0/pci1106,287b at 13
panic[cpu0]/thread=ffffff00041b9c60: BAD TRAP: type=e (#pf Page fault)
rp=ffffff00041b9900 addr=10 occurred in module "pcie_pci" due to a NULL pointer
dereference
sched: #pf Page fault
Bad kernel fault at addr=0x10
pid=0, pc=0xfffffffff7dc6c18, sp=0xffffff00041b99f0, eflags=0x10246
cr0: 8005003b<pg,wp,ne,et,ts,mp,pe> cr4: 6f8<xmme,fxsr,pge,mce,pae,pse,de>
cr2: 10cr3: 3400000cr8: c
rdi: ffffff0148cf2530 rsi: 0 rdx: 60400
rcx: ffffff00041b9a10 r8: ffffff014ae39000 r9: 1
rax: 0 rbx: 0 rbp: ffffff00041b9a10
r10: fffffffffb84b574 r11: 0 r12: ffffff0148cf2530
r13: 0 r14: ffffff0147990ad8 r15: ffffff0147990ad8
fsb: 0 gsb: fffffffffbc2e070 ds: 4b
es: 4b fs: 0 gs: 1c3
trp: e err: 0 rip: fffffffff7dc6c18
cs: 30 rfl: 10246 rsp: ffffff00041b99f0
ss: 38
ffffff00041b97e0 unix:die+dd ()
ffffff00041b98f0 unix:trap+1752 ()
ffffff00041b9900 unix:cmntrap+e9 ()
ffffff00041b9a10 pcie_pci:pepb_check_slot_disabled+a8 ()
ffffff00041b9a70 pcie_pci:pepb_attach+40 ()
ffffff00041b9ad0 genunix:devi_attach+80 ()
ffffff00041b9b00 genunix:attach_node+95 ()
ffffff00041b9b40 genunix:i_ndi_config_node+a5 ()
ffffff00041b9b60 genunix:i_ddi_attachchild+40 ()
ffffff00041b9ba0 genunix:i_ddi_attach_node_hierarchy+61 ()
ffffff00041b9be0 genunix:attach_driver_nodes+59 ()
ffffff00041b9c20 genunix:ddi_hold_installed_driver+116 ()
ffffff00041b9c40 genunix:attach_drivers+37 ()
ffffff00041b9c50 unix:thread_start+8 ()
panic: entering debugger (no dump device, continue to reboot)
Welcome to kmdb
kmdb: unable to determine terminal type: assuming `vt100'
Loaded modules: [ scsi_vhci mac uppc neti unix cpu_ms.AuthenticAMD.15 zfs krtld
s1394 uhci hook genunix ip usba specfs pcplusmp cpu.generic sctp arp sockfs ]
[0]> ::c
kmdb: invalid command '::c': unknown dcmd name
[0]> :c
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
