Hi
Just got the below message, could anyone comment on what might have caused it.
The machine is a bog-standard Gigabyte GA-M61PME-S2 motherboard, a single
DiamondMax2 250GB disk.
Also if this were a prodution machine the best way to solve the problem.
Regards Paul
paulj at opensolaris-home:~$ pfexec zpool status -x
pool: rpool
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
rpool DEGRADED 0 0 10
c7d0s0 DEGRADED 0 0 36 too many errors
errors: 5 data errors, use '-v' for a list
paulj at opensolaris-home:~$ pfexec zpool status -v
pool: rpool
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
rpool DEGRADED 0 0 10
c7d0s0 DEGRADED 0 0 36 too many errors
errors: Permanent errors have been detected in the following files:
rpool/ROOT/opensolaris-7:/var/pkg/pkg/SUNWaalib/1.4.5%2C5.11-0.133%3A20100216T061050Z/manifest
//var/log/ConsoleKit/history
//var/lp/logs/lpsched
//var/svc/log/system-console-login:default.log
//var/log/syslog
paulj at opensolaris-home:~$
--
This message posted from opensolaris.org
