Hello, I try to install OpenSolaris but I have some error in installation log:
<OM Feb 22 22:46:44> Timezone setting will be TZ=UTC <OM Feb 22 22:46:44> Set timezone <OM Feb 22 22:46:44> System reports enough physical memory for installation, swap is optional <OM Feb 22 22:47:41> disk currently doesn't contain any partition <OM Feb 22 22:47:41> disk partition info changed <OM Feb 22 22:47:41> No disk partitions defined prior to install <OM Feb 22 21:47:51> Timezone setting will be TZ=Europe/Rome <OM Feb 22 21:47:51> Set timezone <OM Feb 22 21:48:15> Disk was changed <OM Feb 22 21:48:15> Disk contains valid Solaris partition <OM Feb 22 21:48:15> whole_disk = 0 <OM Feb 22 21:48:15> diskname set = c9d0 <OM Feb 22 21:48:15> Set fdisk attrs <TIDM_E Feb 22 21:48:15> Couldn't read partition table for disk c9d0 <TIDM_E Feb 22 21:48:15> Couldn't preserve partitions on disk c9d0 - fdisk failed <TIMM_E Feb 22 21:48:15> Couldn't create fdisk partition table on disk <c9d0> <OM Feb 22 21:48:15> Could not create fdisk target <OM Feb 22 21:48:15> TI process failed <OM Feb 22 21:48:15> Target instantiation failed exit_val=-1 I also in startup live cd I have this warning: ... Probing for device nodes... WARNING: /pci0 at 0,0/pci-ide at 9/ide at 0/cmdk at 0,0 (Disk0); Error for command 'read sector' Error level: Informational Sense key: aborted command ... Probably the problem is hd. My hd is SEAGATE Barracuda 500GB SATA2 16MB primary master. Some help? Thank you -- This message posted from opensolaris.org
