[osol-help] Re: Marvell Yukon Ethernet driver

[Boris Derzhavets]

1.Modify script ./SKGEsolx/installation/postinstallation :-
Edit add_drv parameters list and put yours "pci11ab,4363" on the list.
2.pkgadd -d . SKGEsolx will exit and report
that original size of postinstallation is XXXXX and differs from actual YYYYY.
3.Edit ./SKGEsolx/pkgmap and put in postinstallation line instead of XXXXX
YYYYY.
4.Run again:-
pkgadd -d . SKGEsolx 
5.Success:- skge0 was plumbed and brought up.
You are prompted for "shutdown -y -g0 -i6".
However, regardless entry into /etc/path_to_inst for ' "0" skge' is in place
corresponding character special oriented device has not been created by
"pkgadd -d . SKGEsolx " as well as symlink /dev/skge0 to this device.
After reboot skge0 will be reported as up and running.
Actually, interface skge0 will be unavailable from local network.
 
 
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
opensolaris-help@opensolaris.org