Hello Cindy and Goo. Since I'm not very skillful using this forum, I don't know where to drop you the note. But I tell you here that you may improve your documentation by using graphics, for example the attached "1.jpg" illustrates the section "Adding Devices to a Storage Pool" and the attached "2.jpg" illustrates the section "Example 4–1 Adding Disks to a RAID-Z Configuration" of http://docs.sun.com/app/docs/doc/817-2271/6mhupg6fu?a=view Of course you may use this graphics or maybe improve them. I also include the Microsoft Visio source file in the case you need it.
NOTE: I had to post here another thread instead of replying in the other thread (http://www.opensolaris.org/jive/thread.jspa?threadID=33306&tstart=0), because I couldn't attach the files (the forum complained and told that I was not able to modify the thread). Thank you very much for your reply. I don't know how new is the section that shows what operations are supported for both raidz and mirrored configurations, but that is the answer to my questions. I think that there is an mistake in section "Example 4–1 Adding Disks to a RAID-Z Configuration". Just look the black marked disks. # zpool add rpool raidz [b]c2t2d0 c2t3d0 c2t4d0[/b] # zpool status pool: rpool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c1t2d0 ONLINE 0 0 0 c1t3d0 ONLINE 0 0 0 c1t4d0 ONLINE 0 0 0 raidz1 ONLINE 0 0 0 [b]c1t2d0[/b] ONLINE 0 0 0 [b]c1t3d0[/b] ONLINE 0 0 0 [b]c1t4d0[/b] ONLINE 0 0 0 errors: No known data errors Thank you very much for your help. Best regards, Huitzi This message posted from opensolaris.org _______________________________________________ opensolaris-help mailing list [email protected]
