Hi Guys,
I got the install going on my DL180 (newly arrived) and DL185!
Initially, I was using the Integrated Lights Out virtual media, but it must
have been emulating some sort of weird USB device. So I setup a Solaris PXE
install server for b79 and Solaris 5/10 and PXE booted. Both of the machines
installed without panicking! One hitch though; I had to download the HP
CPQary3-1.90 driver for the Smart Array E200 controllers, rename the sol_210
folder to sol_211 with an ISO editor, and load it.
Unfortunately, b79 still does not install on my DL385s. Solaris 5/10 does.
The DL385 is on the SXDE HCL. Here is a stack backtrace on one of them:
kmdb_enter+0xa()
debug enter+0x27(fe8b529c)
panicsys+0x338(fe8b3798, c31f0a88, fec3bca4, 1)
vpanic+0xc3(fe8b3798, c31f0a88)
panic+0x12(fe8b3798, e, fe8b395c, fe8b3848, c31f0b84, 48)
die+0x98(e, c31f0b84, 48, 1)
trap+0x11e9(c31f0b84, 48, 1)
0xfe80037c()
cpu.generic'gcpu mca logout+0x1b4(c1f94020, 0, ffffffff, ffffffff, c31f0ca8, 1)
cpu.generic'gcpu ntv_mca,_poll+0xa1(c1f94020, 0)
cpu.generic'gcpu ntv_mca,_poll_wrappert0x42(c1f94020, 0)
cpu.generic'gcpu ntv_mca,_poll_cyclic+0x10(c1f94020)
cyclic_softint+0x99(c304c800, 0)
cbe_low_level+0x14(0, 0)
av_dispatch_softvect+0x55(2)
dispatch_softint+0x1d(0, 0)
switch_sp_and_call+0xf(c31f0ddc, fe819240, 0, 0)
dosoftint+0x47(c31ecd44)
do_interrupt+0xdf(c31ecd44, fec3dO84)
_interrupt+0x59()
mach_cpu_idle+0xd{)
cpu_idle+0x8e()
idle+0xde(0, 0)
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
