Hi
If the df -h list is complete it looks as if you have allocated some 6.5
GB in total to solaris.
The rest of the Disk drives capacity is probably in another PC BIOS
Hardware partition.
To list the hardware partitions you can use the command " fdisk"
your physical disk device is probably /dev/rdsk/c0d0p0 , look in
/dev/rdsk to find out !
fdisk output should look similar to :
--------------------------------------------------------------------
# fdisk /dev/rdsk/c0d0p0
Total disk size is 18241 cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 Active Solaris2 1 18228 18228 100
SELECT ONE OF THE FOLLOWING:
1. Create a partition
2. Specify the active partition
3. Delete a partition
4. Change between Solaris and Solaris2 Partition IDs
5. Exit (update disk configuration and exit)
6. Cancel (exit without updating disk configuration)
Enter Selection:
------------------------------------------------------------------------------
You probably have more than one partition here which prevents solaris
from allocating the diskspace in the installtion phase.
So basically i belive you need to delete ALL the partitions , with option
3 .
and then choose option 5 to exit .
As you are Not useing OpenSolaris 2008.05 the installer in SXCE och
Solaris 10 is capable of creating a new Solaris partitoin covering the whole
disk the next time you install , which you will have to do.
Another alternative is to use Partition magic or Gparted live cd to fix the
partition table
http://gparted.sourceforge.net/livecd.php
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
