Hi, i`m on the snv_98, and i`m unable to mount USB drive.
dmesg shows:
Oct 21 16:29:05 opensolaris usba: [ID 912658 kern.info] USB 2.0 device
(usb1058,903) operating at hi speed (USB 2.x) on USB 2.0 root hub: [EMAIL
PROTECTED], usb_mid0 at bus address 2
Oct 21 16:29:05 opensolaris usba: [ID 349649 kern.info] Western Digital
External HDD 57442D574D41505731333830333532
Oct 21 16:29:05 opensolaris genunix: [ID 936769 kern.info] usb_mid0 is /[EMAIL
PROTECTED],0/pci103c,[EMAIL PROTECTED],7/[EMAIL PROTECTED]
Oct 21 16:29:05 opensolaris genunix: [ID 408114 kern.info] /[EMAIL
PROTECTED],0/pci103c,[EMAIL PROTECTED],7/[EMAIL PROTECTED] (usb_mid0) online
Oct 21 16:29:05 opensolaris usba: [ID 912658 kern.info] USB 2.0 interface
(usbif1058,903.config1.0) operating at hi speed (USB 2.x) on USB 2.0 root hub:
[EMAIL PROTECTED], scsa2usb0 at bus address 2
Oct 21 16:29:05 opensolaris usba: [ID 349649 kern.info] Western Digital
External HDD 57442D574D41505731333830333532
Oct 21 16:29:05 opensolaris genunix: [ID 936769 kern.info] scsa2usb0 is /[EMAIL
PROTECTED],0/pci103c,[EMAIL PROTECTED],7/[EMAIL PROTECTED]/[EMAIL PROTECTED]
Oct 21 16:29:05 opensolaris genunix: [ID 408114 kern.info] /[EMAIL
PROTECTED],0/pci103c,[EMAIL PROTECTED],7/[EMAIL PROTECTED]/[EMAIL PROTECTED]
(scsa2usb0) online
Oct 21 16:29:05 opensolaris usba: [ID 912658 kern.info] USB 2.0 interface
(usbif1058,903.config1.1) operating at hi speed (USB 2.x) on USB 2.0 root hub:
[EMAIL PROTECTED], hid1 at bus address 2
Oct 21 16:29:05 opensolaris usba: [ID 349649 kern.info] Western Digital
External HDD 57442D574D41505731333830333532
Oct 21 16:29:05 opensolaris genunix: [ID 936769 kern.info] hid1 is /[EMAIL
PROTECTED],0/pci103c,[EMAIL PROTECTED],7/[EMAIL PROTECTED]/[EMAIL PROTECTED]
Oct 21 16:29:05 opensolaris genunix: [ID 408114 kern.info] /[EMAIL
PROTECTED],0/pci103c,[EMAIL PROTECTED],7/[EMAIL PROTECTED]/[EMAIL PROTECTED]
(hid1) online
Oct 21 16:29:05 opensolaris scsi: [ID 193665 kern.info] sd1 at scsa2usb0:
target 0 lun 0
Oct 21 16:29:05 opensolaris genunix: [ID 936769 kern.info] sd1 is /[EMAIL
PROTECTED],0/pci103c,[EMAIL PROTECTED],7/[EMAIL PROTECTED]/[EMAIL
PROTECTED]/[EMAIL PROTECTED],0
Oct 21 16:29:05 opensolaris genunix: [ID 408114 kern.info] /[EMAIL
PROTECTED],0/pci103c,[EMAIL PROTECTED],7/[EMAIL PROTECTED]/[EMAIL
PROTECTED]/[EMAIL PROTECTED],0 (sd1) online
format shows:
Searching for disks...
The device does not support mode page 3 or page 4,
or the reported geometry info is invalid.
WARNING: Disk geometry is based on capacity data.
The current rpm value 0 is invalid, adjusting it to 3600
done
c0t0d0: configured with capacity of 465.74GB
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <WD-5000AAKSExterna-107a cyl 60799 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/pci103c,[EMAIL PROTECTED],7/[EMAIL
PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED],0
1. c3d0 <DEFAULT cyl 30398 alt 2 hd 255 sec 63>
/[EMAIL PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED]/[EMAIL
PROTECTED],0
thus, i should be able to mount this drive, it`s even being shown in Places ->
Computer -> USB Drive, but it says - Unable to mount location; cant mount file.
mount says:
mount -F pcfs /dev/dsk/c0t0d0p0 /mnt
mount: /dev/dsk/c0t0d0p0 is not a DOS filesystem.
mount -F pcfs /dev/dsk/c0t0d0p2 /mnt
mount: I/O error
Is USB drivers stack is OK in OpenSolaris?
Thanks for your replies.
--
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
