Hi gents, I've recently ran into a problem. The client is asking us not to do Network Installation on their premises and we have to install Solaris on T1000 servers. Right now I have about 6 servers (with a few more on the way) that I've upgraded to the latest firmware (OpenBoot 4.30.3). I see the USB controller in the PCI device tree on OpenBoot, but it doesn't show anything attached.
As per question #25 from http://www.sun.com/io_technologies/usb/USB-Faq.html , I was expecting for this to work, but apparently it doesn't. Any insights? The preinstalled Solaris sees the USB DVD-ROM. When it starts up, the firmware shows the devices, but browsing to them shows empty "folders" Here's the output of the OBP: SC Alert: Host System has Reset cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu Device: pci Device: ebus /e...@800: serial Device: pci /p...@780: Device 0 pci /p...@780/p...@0: Device 0 usb usb usb /p...@780/p...@0: Device 1 Nothing there (...) /p...@7c0: Device 0 pci /p...@7c0/p...@0: Device 4 network network /p...@7c0/p...@0: Device 8 pci /p...@7c0/p...@0/p...@8: Device 1 network network /p...@7c0/p...@0/p...@8: Device 2 scsi tape disk (...) Sun Fire(TM) T1000, No Keyboard Copyright 2009 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.30.3, 8064 MB memory available, Serial #XXXXXXXX. Ethernet address XX:XX:XX:XX:XX:XX, Host ID: XXXXXXXX. {0} ok {0} ok boot /p...@780/p...@0/u...@0,2/stor...@2/d...@0,0:f Boot device: /p...@780/p...@0/u...@0,2/stor...@2/d...@0,0:f File and args: ERROR: boot-read fail Can't locate boot device -- This message posted from opensolaris.org _______________________________________________ opensolaris-help mailing list [email protected]
