Are you saying that you did not have the 200GB drive show up in gparted?
When I ran it, I got the same ZFS message, but it still showed my
partitions. And I got the exact same message when running the format
command:
% pfexec format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c2t0d0 <DEFAULT cyl 9921 alt 2 hd 255 sec 63>
/p...@0,0/pci1179,1...@1f,2/d...@0,0
Specify disk (enter its number): 0
selecting c2t0d0
[disk formatted]
/dev/dsk/c2t0d0s0 is part of active ZFS pool rpool. Please see zpool(1M).
So what needs fixing exactly? If the problem is that you see no drives
displayed, then you might need to open a bug to describe your situation.
-- Alan
Paul Gress wrote:
Paul Gress wrote:
weknox wrote:
Hi all
When I run gparted in a terminal (as su), I receive the following
error:
wek...@antonio-gramsci:~# gparted
======================
libparted : 1.8.8
======================
/dev/dsk/c7d0s0 is part of active ZFS pool media-pool. Please see
zpool(1M).
I get the same exact messages. I assumed it it was because I didn't
have any file systems it could read and wasn't ZFS aware. I could be
wrong.
OK, I am wrong. I just took a USB 200gig drive formated with the UFS
file system, and the same exact error. Well just have to wait for a fix.
Paul
_______________________________________________
opensolaris-help mailing list
[email protected]
_______________________________________________
opensolaris-help mailing list
[email protected]
