Thank you for your answer. I got ntfs3g running, that seems to work.
My problem is now, that in the section "how to find you ntfs partision? here's
an example:" it seems so, that OpenSolaris has some problems with my SATA
controler. When I run format, I got the output:
AVAILABLE DISK SELECTIONS:
0. c9t0d0 <DEFAULT cyl 3821 alt 2 hd 255 sec 63>
/p...@0,0/pci1462,7...@1d,7/stor...@3/d...@0,0
1. c10d0 <drive type unknown>
/p...@0,0/pci-...@1f,2/i...@0/c...@0,0
2. c11d0 <drive type unknown>
/p...@0,0/pci-...@1f,2/i...@1/c...@0,0
Specify disk (enter its number):
Now, I enter "1" (also tried 2), but then get the message:
----------------
AVAILABLE DRIVE TYPES:
0. other
Specify disk type (enter its number):
----------------
Now, I enter 0, but then format asks me
----------------
Enter number of data cylinders:
----------------
I googled around and found this thread:
----------------
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-manually-partition-nexenta-opensolaris-471632/
----------------
When I try to execute:
----------------
fdisk -v -W - /dev/dsk/c10d0
fdisk: Cannot stat device /dev/dsk/c10d0.
----------------
So, as I can see it, OpenSolaris doesn't supports my SATA controler??
--
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
[email protected]
