I have 4 500 GB HDDs attached via SATA and 1 CF card in a IDE adapter attached
to my mainboard. I want to use eon but have the same problem with normal
OpenSolaris 2009.06.
I have to add "[b]-B disable-ehci=true[/b]" to the GRUB entry to prevent a hang
in an earlier stage.
If the CF card is not attached to the computer the live CD boots and the system
is usable. But if the card is present, I get endless the following message
after "[i]Configuring devices.[/i]":
[i]WARNING: /p...@0,0/pci-...@6/i...@0 (ata0):
timeout: abort request, target=0 lun=0
WARNING: /p...@0,0/pci-...@6/i...@0 (ata0):
timeout: abort device, target=0 lun=0
WARNING: /p...@0,0/pci-...@6/i...@0 (ata0):
timeout: reset request, target=0 lun=0
WARNING: /p...@0,0/pci-...@6/i...@0 (ata0):
timeout: reset bus, target=0 lun=0
WARNING: /p...@0,0/pci-...@6/i...@0/c...@0,0 (Disk4):
Error for command 'read sector' Error Level: Informational
Sense Key: aborted command
Vendor 'Gen-ATA ' error code: 0x3[/i]
After the first few times I get that 2 lines and it accesses the CD. Then only
the warnings above appear.
[i]Hostname: eon
Probing live-fs devices[/i]
What have I to do to use the CF card?
--
This message posted from opensolaris.org
_______________________________________________
opensolaris-help mailing list
opensolaris-help@opensolaris.org
