Not seen a reply to this as yet but the only method I know is for Sun
x86 hardware and that is ipmitool. The prtdiag -v works for Sparc but
is not that useful for x86.
On x86 the SP monitors this data and ipmitool can access it.
ipmitool sdr list
PWRBS | 0 unspecified | nc
ACPI | 0 unspecified | nc
/P0/PRSNT | 0x02 | ok
/P1/PRSNT | 0x02 | ok
/P0/D0/PRSNT | 0x01 | ok
/P0/D1/PRSNT | 0x01 | ok
/P0/D2/PRSNT | 0x01 | ok
/P0/D3/PRSNT | 0x01 | ok
/P0/D4/PRSNT | 0x01 | ok
/P0/D5/PRSNT | 0x01 | ok
/P0/D6/PRSNT | 0x01 | ok
/P0/D7/PRSNT | 0x01 | ok
/P0/D8/PRSNT | 0x02 | ok
/P1/D0/PRSNT | 0x01 | ok
/P1/D1/PRSNT | 0x01 | ok
/P1/D2/PRSNT | 0x01 | ok
/P1/D3/PRSNT | 0x01 | ok
/P1/D4/PRSNT | 0x01 | ok
/P1/D5/PRSNT | 0x01 | ok
/P1/D6/PRSNT | 0x01 | ok
/P1/D7/PRSNT | 0x01 | ok
/P1/D8/PRSNT | 0x02 | ok
/MB/T_AMB | 29 degrees C | ok
INTSW | 0 unspecified | nc
SP_NEEDS_REBOOT | 0 unspecified | nc
MB/R0/P | 0 unspecified | cr
MB/R1/P | 0 unspecified | cr
MB/R2/P | 0 unspecified | cr
MB/R0/PCIE0/P | 0 unspecified | cr
MB/R1/PCIE1/P | 0 unspecified | nc
MB/R2/PCIE2/P | 0 unspecified | nc
FB0/PRSNT | 0 unspecified | cr
FB1/PRSNT | 0 unspecified | cr
DBP/PRSNT | 0 unspecified | cr
PS0/PRSNT | 0 unspecified | cr
PS1/PRSNT | 0 unspecified | nc
/SYS/VPS | 130 Watts | ok
PS0/VINOK | 0 unspecified | cr
PS0/PWROK | 0 unspecified | cr
PS0/CUR_FAULT | 0 unspecified | nc
PS0/VOLT_FAULT | 0 unspecified | nc
PS0/FAN_FAULT | 0 unspecified | nc
PS0/TEMP_FAULT | 0 unspecified | nc
PS0/T_AMB | 42 degrees C | ok
PS0/F0/TACH | 6528 RPM | ok
PS0/V_IN | 210 Volts | ok
PS0/I_IN | 0.62 Amps | ok
PS0/V_OUT | 12 Volts | ok
PS0/I_OUT | 9 Amps | ok
PS0/IN_POWER | 130 Watts | ok
PS0/OUT_POWER | 100 Watts | ok
PS1/VINOK | disabled | ns
PS1/PWROK | disabled | ns
PS1/CUR_FAULT | disabled | ns
PS1/VOLT_FAULT | disabled | ns
PS1/FAN_FAULT | disabled | ns
PS1/TEMP_FAULT | disabled | ns
PS1/T_AMB | disabled | ns
PS1/F0/TACH | disabled | ns
PS1/V_IN | disabled | ns
PS1/I_IN | disabled | ns
PS1/V_OUT | disabled | ns
PS1/I_OUT | disabled | ns
PS1/IN_POWER | disabled | ns
PS1/OUT_POWER | disabled | ns
T_AMB | 24 degrees C | ok
FB0/FM0/PRSNT | 0 unspecified | cr
FB0/FM1/PRSNT | 0 unspecified | cr
FB0/FM2/PRSNT | 0 unspecified | cr
FB0/FM3/PRSNT | 0 unspecified | cr
FB0/FM0/F0/TACH | 7800 RPM | ok
FB0/FM0/F1/TACH | 7600 RPM | ok
FB0/FM1/F0/TACH | 7600 RPM | ok
FB0/FM1/F1/TACH | 7700 RPM | ok
FB0/FM2/F0/TACH | 7600 RPM | ok
FB0/FM2/F1/TACH | 7600 RPM | ok
FB0/FM3/F0/TACH | 7600 RPM | ok
FB0/FM3/F1/TACH | 7700 RPM | ok
FB1/FM0/PRSNT | 0 unspecified | cr
FB1/FM1/PRSNT | 0 unspecified | cr
FB1/FM2/PRSNT | 0 unspecified | cr
FB1/FM3/PRSNT | 0 unspecified | nc
FB1/FM0/F0/TACH | 7600 RPM | ok
FB1/FM0/F1/TACH | 7600 RPM | ok
FB1/FM1/F0/TACH | 7900 RPM | ok
FB1/FM1/F1/TACH | 7800 RPM | ok
FB1/FM2/F0/TACH | 7800 RPM | ok
FB1/FM2/F1/TACH | 7800 RPM | ok
DBP/HDD0/PRSNT | 0x02 | ok
DBP/HDD1/PRSNT | 0x02 | ok
DBP/HDD2/PRSNT | 0x01 | ok
DBP/HDD3/PRSNT | 0x01 | ok
DBP/HDD4/PRSNT | 0x01 | ok
DBP/HDD5/PRSNT | 0x01 | ok
DBP/HDD6/PRSNT | 0x01 | ok
DBP/HDD7/PRSNT | 0x01 | ok
Justa Guy wrote, On 04/02/10 11:35:
Is it possible in OpenSolaris 2009.06 to read the temperature sensor output?
I vaguely recall there being a tray applet that would use lmsensors or
something, how does OpenSolaris do this?
Thank you in advance.
_______________________________________________
opensolaris-help mailing list
opensolaris-help@opensolaris.org
