Ok, the tests passed when linking the fipscanister against the 0.9.8-stable snap 20081123 ...
-Brad Brad House wrote: > I might have jumped the gun here. I'm getting that failure > on OpenSSL 0.9.8e (no fips), which I think was the branch > point for the FIPS v1.2, but not OpenSSL 0.9.8f (no fips). > So something must have been fixed between those 2 releases > for FreeBSD7. > > I'm going to go ahead and build the FIPS release, then try to > use the 20081123 snapshot and link the fips canister to that and > see if the tests pass. > > -Brad > > Brad House wrote: >> When running the tx509 test (with no args), it ends up generating >> a SIGILL. GDB says the instruction is 'ud2a' which I believe is the >> guaranteed illegal opcode on ia32. Not sure why it's being generated >> though. This occurs on both FreeBSD 7 x86 and x64. FreeBSD 5 and 6 >> do not exhibit this behavior. All are being run within VMWare Server >> v1.0.x, but that's never been an issue before. >> >> Just for testing purposes, I also tried using the 'no-asm', 'no-sse2', >> and '386' flags, and edited Configure to use '-O0 -g' instead of '-O3' >> and it also generates the same thing. >> >> Here's what GDB says: >> >> Starting program: /usr/home/build/openssl-fips-1.2/apps/openssl x509 -in >> fff.p -inform p -outform d >> [New LWP 100100] >> [New Thread 0x28401100 (LWP 100100)] >> >> Program received signal SIGILL, Illegal instruction. >> [Switching to Thread 0x28401100 (LWP 100100)] >> 0x0815b5e0 in PEM_read_bio_X509_AUX (bp=0x284051c0, x=0x0, cb=0x80c2a60 >> <password_callback>, u=0x0) >> (gdb) bt >> #0 0x0815b5e0 in PEM_read_bio_X509_AUX (bp=0x284051c0, x=0x0, cb=0x80c2a60 >> <password_callback>, u=0x0) >> #1 0x080c3843 in load_cert (err=0x28405040, file=0xbfbfedc3 "fff.p", >> format=3, pass=0x0, e=0x0, cert_descrip=0x81d3290 "Certificate") at >> apps.c:821 >> #2 0x080af73e in x509_main (argc=0, argv=0xbfbfecc0) at x509.c:632 >> #3 0x0809082b in do_cmd (prog=0x28406200, argc=7, argv=0xbfbfeca4) at >> openssl.c:396 >> #4 0x080904b8 in main (Argc=7, Argv=0xbfbfeca4) at openssl.c:315 >> (gdb) disas >> Dump of assembler code for function PEM_read_bio_X509_AUX: >> 0x0815b5e0 <PEM_read_bio_X509_AUX+0>: ud2a >> End of assembler dump. >> >> $ gcc --version >> gcc (GCC) 4.2.1 20070719 [FreeBSD] >> >> Any ideas? GCC issue perhaps? >> >> Thanks. >> -Brad >> >> >> ______________________________________________________________________ >> OpenSSL Project http://www.openssl.org >> Development Mailing List openssl-dev@openssl.org >> Automated List Manager [EMAIL PROTECTED] >> > ______________________________________________________________________ > OpenSSL Project http://www.openssl.org > Development Mailing List openssl-dev@openssl.org > Automated List Manager [EMAIL PROTECTED] > ______________________________________________________________________ OpenSSL Project http://www.openssl.org Development Mailing List openssl-dev@openssl.org Automated List Manager [EMAIL PROTECTED]
