hi,

good point Balaji, the dst_port is the port on which ovs is listening
for vxlan packets, but I don't know what is the option in ovs-vsctl to
set the remote port of the vxlan unicast tunnel interface.
But it looks like a bug since you're right, tunnel_sync and
tunnel_update RPC messages should handle the VXLAN udp port,
additionnaly to the vxlan remote ip.

Kyle is away for the moment, he should know the good option to set in
ovs-vsctl to specify a remote port for a vxlan tunnel. But you should
fill a bug for that, to track this issue.

Thanks for playing with vxlan, and  helping us to debug it!


On Wed, Oct 9, 2013 at 6:55 AM, P Balaji-B37839 <b37...@freescale.com> wrote:
> Any comments on the below from community using OVS will be helpful.
>
> Regards,
> Balaji.P
>
>> -----Original Message-----
>> From: P Balaji-B37839
>> Sent: Tuesday, October 08, 2013 2:31 PM
>> To: OpenStack Development Mailing List; Addepalli Srini-B22160
>> Subject: [openstack-dev] [Neutron] OVS Agent and VxLan UDP Ports
>>
>> Hi,
>>
>> Current OVS Agent is creating tunnel with dst_port as the port configured
>> in INI file on Compute Node. If all the compute nodes on VXLAN network
>> are configured for DEFAULT port it is fine.
>>
>> When any of the Compute Nodes are configured for CUSTOM udp port as VXLAN
>> UDP Port, Then how does the tunnel will be established with remote IP.
>>
>> It is observed that the fan-out RPC message is not having the destination
>> port information.
>>
>> Regards,
>> Balaji.P
>
>
>
> _______________________________________________
> OpenStack-dev mailing list
> OpenStack-dev@lists.openstack.org
> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev

_______________________________________________
OpenStack-dev mailing list
OpenStack-dev@lists.openstack.org
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev

Reply via email to