On 7 December 2017 at 14:02, Gordon, Kent S <kent.gor...@verizonwireless.com> wrote: > On Thu, Dec 7, 2017 at 3:24 AM, Goutham Pratapa > <pratapagout...@gmail.com> wrote: >> Hi, >> >> We are trying test environment deployment with OpenStack-ansible pike >> release. After executing setup-hosts.yaml, the lxc-containers were created. >> We have an issue while doing >> apt-get update in infra-repo-container as it couldn't connect to the proxy >> server. >> The strange thing is that the infra-repo-container is not showing ip on any >> interface when checked with ip r. >> >> Could you please help us with this issue. Below are some logs on the >> container and on the host. >> >> E: Failed to fetch >> http://security.ubuntu.com/ubuntu/dists/xenial-security/main/binary-amd64/Packages >> Something wicked happened resolving 'xx.xx.xx.xx:8080' (-9 - Address family >> for hostname not supported) >> >> root@infra1-repo-container-a7a137c4:/# ping xx.xx.xx.xx (proxy server) >> connect: Network is unreachable >> >> On Container: >> >> root@infra1-repo-container-a7a137c4:/# cat /etc/network/interfaces >> # The loopback network interface >> auto lo >> iface lo inet loopback >> # LXC interface, this is ALWAYS assumed to be DHCP. >> auto eth0 >> iface eth0 inet dhcp >> # Load any additional configs >> source /etc/network/interfaces.d/*.cfg >> >> root@infra1-repo-container-a7a137c4:/# cat >> /etc/network/interfaces.d/eth1.cfg >> # Ansible managed >> >> ### start generated network for [ eth1 ] ### >> auto eth1 >> iface eth1 inet static >> address 192.168.124.126 >> netmask 255.255.255.0 >> mtu 1500 >> post-up sysctl -w net.ipv4.conf.$IFACE.arp_notify=1 >> post-up ip link set $IFACE address $(cat /sys/class/net/$IFACE/address) >> ### end generated network for [ eth1 ] ### >> root@infra1-repo-container-a7a137c4:/# route -n >> Kernel IP routing table >> Destination Gateway Genmask Flags Metric Ref Use >> Iface >> >> On host: >> >> root@ubuntu:/home/ansible# ifconfig lxcbr0 >> lxcbr0 Link encap:Ethernet HWaddr fe:02:f2:ff:bd:86 >> inet addr:10.0.3.1 Bcast:10.0.3.255 Mask:255.255.255.0 >> inet6 addr: fe80::a085:76ff:febb:401d/64 Scope:Link >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >> RX packets:691 errors:0 dropped:0 overruns:0 frame:0 >> TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:181224 (181.2 KB) TX bytes:828 (828.0 B) >> root@ubuntu:/home/ansible# ip r >> default via 192.168.124.1 dev eno1 >> 10.0.3.0/24 dev lxcbr0 proto kernel scope link src 10.0.3.1 >> 192.168.124.0/24 dev eno1 proto kernel scope link src 192.168.124.28 >> 192.168.124.0/24 dev br-mgmt proto kernel scope link src 192.168.124.28 >> >> >> Thanks in advance... >> >> -- >> Thanks !!! >> Goutham Pratapa >> >> __________________________________________________________________________ >> OpenStack Development Mailing List (not for usage questions) >> Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe >> https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.openstack.org_cgi-2Dbin_mailman_listinfo_openstack-2Ddev&d=DwIGaQ&c=udBTRvFvXC5Dhqg7UHpJlPps3mZ3LRxpb6__0PomBTQ&r=Xkn6r0Olgrmyl97VKakpX0o-JiB_old4u22bFbcLdRo&m=WEmA5tlLT-4nxWR8GoeTS7dM7n6BX52-5ELlKu5-o4c&s=RjnZBhACZLdykt8ETppf88EEKeePLRoCWZYV060iJw8&e= >> > > Is a AIO or multi host setup? > > I have found places in openstack ansible that bypass the proxy server > variables. > My memory was is that it was using systemd to fetch files in certain > cases and that systemd did not honor proxy variables. > I have ended up using a secondary proxy on the deployment host along > with a NAT setup > on the deployment host that made sure to send external requests to the proxy. > > > > -- > Kent S. Gordon > kent.gor...@verizonwireless.com Work:682-831-3601 Mobile: 817-905-6518 > > __________________________________________________________________________ > OpenStack Development Mailing List (not for usage questions) > Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
Could you show your bridges on the host too? And your openstack_user_config.yml? When the repo-server gets installed, it installs a reverse proxy. All the nodes are then configured to use the repo server(s). So all the nodes need to reach it, on the management network. Here you are a little early in the steps, you can't install the repo server because you don't have connectivity in your containers. That shouldn't happen. You have maybe a misconfiguration, or something happened to your containers that ended up with no IP assigned on the containers. Maybe try to restart your repo container, see if it works better. Else I'd advise to debug this problem a little more in depth. You could join us on our irc channel #openstack-ansible for help. Best regards, Jean-Philippe Evrard (evrardjp) __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
