Hello Ironic guys, In my lab environment, I have finished setting up the multi-tenant network environment for Ironic using networking-generic-switch (Cisco IOS device). The official Ironic doc only talked about one BM node with one port for provisioning and tenant network.
My process here: I have created 2 ports, 01 port with pxe_enabled for provisioning network and remaining port with pxe disabled; then using nova boot with --nic option, hoping it can get network information via Neutron. But it failed. So my question here is: 1. Is this possible for enroll a node, then start provisioning it via one port and then configuring tenant network via another port? 2. Is my process correct, if not, could you provide some guides for the right way? Thanks, Hieu. -- -----BEGIN GEEK CODE BLOCK----- Version: 3.1 GCS/CM/IT/M/MU d-@? s+(++):+(++) !a C++++(++++)$ ULC++++(++)$ P L++(+++)$ E !W N* o+ K w O- M V- PS+ PE++ Y+ PGP+ t 5 X R tv+ b+(++)>+++ DI- D+ G e++(+++) h-- r(++)>+++ y- ------END GEEK CODE BLOCK------
__________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev