The important part of the error message seems to be: NoSuchOptError: no such option driver in group [binding]
In my /etc/kuryr/kuryr.conf file, all the text is commented out in the [binding] section. Some of the commented options have "driver" in the name. Since they are commented, I guess they have defaults. I suggest commenting any option that mentions "driver" and then restart kuryr-libnetwork. -Jacob Burckhardt From: Rania Adouni <raniaado...@gmail.com> Sent: Tuesday, November 20, 2018 4:58 PM To: openstack-dev@lists.openstack.org Subject: Re: [openstack-dev] [zun] Failed to create Container hi , Thanks for your reply and yes the problem that kuryr-libnetwork is failed to start with the error : ● kuryr-libnetwork.service - Kuryr-libnetwork - Docker network plugin for Neutron Loaded: loaded (/etc/systemd/system/kuryr-libnetwork.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since mer. 2018-11-21 01:48:48 CET; 287ms ago Process: 13974 ExecStart=/usr/local/bin/kuryr-server --config-file /etc/kuryr/kuryr.conf (code=exited, status=1/FAILURE) Main PID: 13974 (code=exited, status=1/FAILURE) nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 13974 ERROR kuryr value = self._do_get(name, group, namespace) nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 13974 ERROR kuryr File "/usr/lib/python2.7/dist-packages/oslo_config/cfg.py", line 2942, in _ nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 13974 ERROR kuryr info = self._get_opt_info(name, group) nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 13974 ERROR kuryr File "/usr/lib/python2.7/dist-packages/oslo_config/cfg.py", line 3099, in _ nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 13974 ERROR kuryr raise NoSuchOptError(opt_name, group) nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 13974 ERROR kuryr NoSuchOptError: no such option driver in group [binding] nov. 21 01:48:48 compute kuryr-server[13974]: 2018-11-21 01:48:48.542 13974 ERROR kuryr nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Main process exited, code=exited, status=1/FAILURE nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Unit entered failed state. nov. 21 01:48:48 compute systemd[1]: kuryr-libnetwork.service: Failed with result 'exit-code'. and also the command lsof -iTCP -sTCP:LISTEN -P doesn't show the kuryr service : COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME dockerd 1144 root 5u IPv4 20120 0t0 TCP compute:2375 (LISTEN) sshd 1288 root 3u IPv4 19532 0t0 TCP *:22 (LISTEN) sshd 1288 root 4u IPv6 19534 0t0 TCP *:22 (LISTEN) dnsmasq 1961 nobody 6u IPv4 23450 0t0 TCP http://192.168.122.1:53 (LISTEN) sshd 4163 adouni 9u IPv6 34950 0t0 TCP localhost:6010 (LISTEN) sshd 4163 adouni 10u IPv4 34951 0t0 TCP localhost:6010 (LISTEN) qemu-syst 4621 libvirt-qemu 18u IPv4 37121 0t0 TCP *:5900 (LISTEN) !!! Le mer. 21 nov. 2018 à 01:45, Jacob Burckhardt <mailto:jburckha...@pdvwireless.com> a écrit : Your error message says it cannot connect to port 23750. That's the kuryr-libnetwork default listen port. On 192.168.1.10, run: lsof -iTCP -sTCP:LISTEN -P On my compute node, it outputs: COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME … kuryr-ser 1976 root 6u IPv4 30896 0t0 TCP localhost:23750 (LISTEN) So, you can see that kuryr is listening on 23750. If lsof does not list a process listening on 23750, then check if kuryr is up by running: systemctl status kuryr-libnetwork You can also try restarting it by running: systemctl restart kuryr-libnetwork I installed that service by following: https://docs.openstack.org/kuryr-libnetwork/queens/install/compute-install-ubuntu.html That is the queens install guide which might help you since zun has no install guide in pike. If you see it listening, you can try this command: telnet 192.168.1.10 23750 If it fails to connect, then try: telnet localhost 23750 If it works with localhost but not 192.168.1.10, then I think that means you need to tell docker to connect to localhost instead of 192.168.1.10. Can you get the commands at the following web page to succeed? https://docs.openstack.org/kuryr-libnetwork/queens/install/verify.html Jacob Burckhardt Senior Software Engineer From: Rania Adouni <mailto:raniaado...@gmail.com> Sent: Tuesday, November 20, 2018 2:02 PM To: mailto:openstack-dev@lists.openstack.org Subject: [openstack-dev] [zun] Failed to create Container Hi , I am starting to use zun on openstack pike , and when I try to lunch container with cirros image , I get this reason : Docker internal error: 500 Server Error: Internal Server Error ("legacy plugin: Post http://192.168.1.10:23750/Plugin.Activate: dial tcp http://192.168.1.10:23750/: connect: connection refused"). you can find here the log on my compute node :https://pastebin.com/nZTiTZiV. some help with this will be great . Best Regards, Rania Adouni __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: http://openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev