> -----Original Message----- > From: Ian Cordasco [mailto:[email protected]] > Sent: Friday, June 12, 2015 12:05 PM > To: OpenStack Development Mailing List (not for usage questions) > Subject: Re: [openstack-dev] Looking for help getting git-review to > work over https > > It looks like it can't run the setup.py because it can't find pbr. > > Could you provide the following: > > - Version of pip you're using (pip --version)
pip 7.0.3 from /usr/lib/python2.7/site-packages (python 2.7) > - How you installed pip (e.g., apt-get install -y python-pip) Sigh. I no longer remember. I know I had to install the EPEL repo. It would have been through "yum", most likely. > - Contents of your global pip configuration (if one exists, it will > be in > ~/.pip/) [global] proxy=https://one.proxy.att.com:8080 > - What you get when you do `python -c 'import setuptools; > print(setuptools.__version__)'` -------------- $ `python -c 'import setuptools; > print(setuptools.__version__)'` File "<string>", line 1 import setuptools; > print(setuptools.__version__) ^ SyntaxError: invalid syntax --------------- I also tried without the wrapping backticks, which you may have used just to wrap the command line. Same result. > - Output of python -V Python 2.7.5 > On 6/12/15, 12:08, "KARR, DAVID" <[email protected]> wrote: > > >> -----Original Message----- > >> From: Ian Cordasco [mailto:[email protected]] > >> Sent: Friday, June 12, 2015 9:57 AM > >> To: OpenStack Development Mailing List (not for usage questions) > >> Subject: Re: [openstack-dev] Looking for help getting git-review > to > >> work over https > >> > >> Python has generally awful support for doing HTTPS over an HTTPS > >> proxy. > >> Can you try doing: > >> > >> # pip install --proxy http://one.proxy.att.com:<appropriate- > port> > > > >Thanks. I already tried that. It's not even clear this is failing > to > >connect. I don't know what this is telling me. > >---------------------- > ># pip install --proxy http://one.proxy.att.com:8080 . > >Processing /home/dk068x/work/git-review > > Complete output from command python setup.py egg_info: > > Download error on https://pypi.python.org/simple/pbr/: [Errno > 1] > >_ssl.c:504: error:140770FC:SSL > routines:SSL23_GET_SERVER_HELLO:unknown > >protocol -- Some packages may not be found! > > Couldn't find index page for 'pbr' (maybe misspelled?) > > Download error on https://pypi.python.org/simple/: [Errno 1] > >_ssl.c:504: error:140770FC:SSL > routines:SSL23_GET_SERVER_HELLO:unknown > >protocol -- Some packages may not be found! > > No local packages or download links found for pbr > > Traceback (most recent call last): > > File "<string>", line 20, in <module> > > File "/tmp/pip-MStPEo-build/setup.py", line 20, in <module> > > setuptools.setup(setup_requires=['pbr'], pbr=True) > >----------------- > > > >> > >> Cheers, > >> Ian > >> > >> On 6/12/15, 10:26, "KARR, DAVID" <[email protected]> wrote: > >> > >> >As I apparently have to sudo this, it would likely be more > >> effective, if > >> >at all, to specify the proxy on the command line. > Unfortunately, > >> > it didn’t make any difference: > >> > > >> ># pip install --proxy "https://one.proxy.att.com:8080"; . > >> >Processing /home/dk068x/work/git-review > >> > Complete output from command python setup.py egg_info: > >> > Download error on https://pypi.python.org/simple/pbr/: > [Errno > >> 1] > >> >_ssl.c:504: error:140770FC:SSL > >> routines:SSL23_GET_SERVER_HELLO:unknown > >> >protocol -- Some packages may > >> > not be found! > >> > Couldn't find index page for 'pbr' (maybe misspelled?) > >> > Download error on https://pypi.python.org/simple/: [Errno > 1] > >> >_ssl.c:504: error:140770FC:SSL > >> routines:SSL23_GET_SERVER_HELLO:unknown > >> >protocol -- Some packages may not > >> > be found! > >> > No local packages or download links found for pbr > >> > Traceback (most recent call last): > >> > File "<string>", line 20, in <module> > >> > File "/tmp/pip-D5jhCD-build/setup.py", line 20, in > <module> > >> > setuptools.setup(setup_requires=['pbr'], pbr=True) > >> > File "/usr/lib64/python2.7/distutils/core.py", line 112, > in > >> setup > >> > _setup_distribution = dist = klass(attrs) > >> >... > >> > > >> > > >> >I’m providing the appropriate https proxy url, as pip appears > to > >> be using > >> >a https url. > >> > > >> >From: Asselin, Ramy [mailto:[email protected]] > >> > > >> >Sent: Thursday, June 11, 2015 4:35 PM > >> >To: OpenStack Development Mailing List (not for usage > questions) > >> >Subject: Re: [openstack-dev] Looking for help getting git- > review > >> to work > >> >over https > >> > > >> > > >> > > >> >Try creating/updated ~/.pip/pip.conf > >> > > >> >With contents: > >> > > >> >[global] > >> >proxy = > >> >http://your_proxy:port/ > >> > > >> >From: KARR, DAVID [mailto:[email protected]] > >> > > >> >Sent: Thursday, June 11, 2015 4:16 PM > >> >To: OpenStack Development Mailing List (not for usage > questions) > >> >Subject: Re: [openstack-dev] Looking for help getting git- > review > >> to work > >> >over https > >> > > >> > > >> > > >> >This is just going swimmingly. > >> > > >> >% sudo python setup.py install > >> >Download error on > >> >https://pypi.python.org/simple/pbr/: [Errno 110] Connection > timed > >> out -- > >> >Some packages may not be found! > >> >Couldn't find index page for 'pbr' (maybe misspelled?) > >> >Download error on > >> >https://pypi.python.org/simple/: [Errno 110] Connection timed > out > >> -- Some > >> >packages may not be found! > >> >No local packages or download links found for pbr > >> > > >> > > >> >Do I have to do something special to set the proxy for this? I > >> have > >> >“http_proxy” and “https_proxy” already set. > >> > > >> >From: ZZelle [mailto:[email protected]] > >> > > >> >Sent: Thursday, June 11, 2015 3:50 PM > >> >To: OpenStack Development Mailing List (not for usage > questions) > >> >Subject: Re: [openstack-dev] Looking for help getting git- > review > >> to work > >> >over https > >> > > >> > > >> > > >> >Indeed, the doc[1] is unclear > >> > > >> >git-review can be installed using: python setup.py install or > pip > >> install > >> >. > >> > > >> > > >> > >[1]http://docs.openstack.org/infra/manual/developers.html#accessin > >> g-gerrit > >> >-over-https > >> > > >> > > >> > > >> >On Thu, Jun 11, 2015 at 11:16 PM, KARR, DAVID <[email protected]> > >> wrote: > >> > > >> >I see. I would guess a footnote on the instructions about this > >> would be > >> >useful. Is > >> >https://github.com/openstack-infra/git-review the proper > location > >> to get > >> >the buildable source? I don’t see any obvious build > instructions > >> there. > >> > > >> >From: ZZelle [mailto:[email protected]] > >> > > >> >Sent: Thursday, June 11, 2015 2:01 PM > >> > > >> >To: OpenStack Development Mailing List (not for usage > questions) > >> >Subject: Re: [openstack-dev] Looking for help getting git- > review > >> to work > >> >over https > >> > > >> > > >> > > >> > > >> > > >> >Hi David, > >> > > >> > > >> >Following git config options are supported by git-review > >> >(https://review.openstack.org/116035) > >> > > >> > git config --global gitreview.scheme https > >> > git config --global gitreview.port 443 > >> > > >> >BUT the feature was merged after 1.24 (it's highlighted by your > >> git > >> >review -vs) > >> > > >> >so the feature is currently only available on the git-review > >> master > >> >branch (which > >> > > >> >is quite stable, i use it every day). > >> > > >> > > >> > > >> > > >> > > >> >Cedric/ZZelle@irc > >> > > >> > > >> > > >> > > >> >On Thu, Jun 11, 2015 at 10:14 PM, KARR, DAVID <[email protected]> > >> wrote: > >> > > >> >I followed the instructions for installing and configuring > >> corkscrew, > >> >similar to what you provided here. The > >> > result seems to indicate it did something, but the overall > result > >> is the > >> >same: > >> > > >> >2015-06-11 13:07:25.866568 Running: git log --color=never -- > >> oneline > >> >HEAD^1..HEAD > >> >2015-06-11 13:07:25.869309 Running: git remote > >> >2015-06-11 13:07:25.872742 Running: git config --get > >> gitreview.username > >> >No remote set, testing > >> >ssh://[email protected]:29418/openstack/horizon.git > >> > ><http://[email protected]:29418/openstack/horizon.git> > >> >2015-06-11 13:07:25.874869 Running: git push --dry-run > >> >ssh://[email protected]:29418/openstack/horizon.git > >> > ><http://[email protected]:29418/openstack/horizon.git> > >> > --all > >> >The authenticity of host '[review.openstack.org > >> ><http://review.openstack.org>]:29418 > >> > (<no hostip for proxy command>)' can't be established. > >> >RSA key fingerprint is > >> 28:c6:42:b7:44:d2:48:64:c1:3f:31:d8:1b:6e:3b:63. > >> >Are you sure you want to continue connecting (yes/no)? yes > >> >ssh://[email protected]:29418/openstack/horizon.git > >> > ><http://[email protected]:29418/openstack/horizon.git> > >> > did not work. > >> >Could not connect to gerrit. > >> >Enter your gerrit username: > >> >--------------------------- > >> > > >> >From: Paul Michali [mailto:[email protected]] > >> > > >> >Sent: Thursday, June 11, 2015 11:09 AM > >> > > >> >To: OpenStack Development Mailing List (not for usage > questions) > >> >Subject: Re: [openstack-dev] Looking for help getting git- > review > >> to work > >> >over https > >> > > >> > > >> > > >> > > >> > > >> >Do you know if you have SSH access to the outside world through > >> the > >> >firewall? > >> > > >> > > >> >Did you setup a proxy? I setup 'corkscrew' under Ubuntu. After > >> >installing, created a .ssh/config file with: > >> > > >> > > >> > > >> >Host > >> >review.openstack.org <http://review.openstack.org> > >> > > >> > ProxyCommand corkscrew <proxy-host> 80 %h %p > >> > > >> > > >> > > >> >The proxy host is one that allows HTTP/HTTPS to outside world > and > >> >corkscrew tunnels the SSH through to port 80. > >> > > >> > > >> > > >> >HTHs, > >> > > >> > > >> > > >> >PCM > >> > > >> > > >> >On Thu, Jun 11, 2015 at 12:44 PM KARR, DAVID <[email protected]> > >> wrote: > >> > > >> > > >> >Thanks for replying. > >> > > >> > > >> >% git review -vs > >> >2015-06-11 09:30:38.396076 Running: git log --color=never -- > >> oneline > >> >HEAD^1..HEAD > >> >2015-06-11 09:30:38.399021 Running: git remote > >> >2015-06-11 09:30:38.401033 Running: git config --get > >> gitreview.username > >> >No remote set, testing > >> >ssh://[email protected]:29418/openstack/horizon.git > >> > ><http://[email protected]:29418/openstack/horizon.git> > >> >2015-06-11 09:30:38.402988 Running: git push --dry-run > >> >ssh://[email protected]:29418/openstack/horizon.git > >> > ><http://[email protected]:29418/openstack/horizon.git> > >> > --all > >> >ssh://[email protected]:29418/openstack/horizon.git > >> > ><http://[email protected]:29418/openstack/horizon.git> > >> > did not work. > >> >Could not connect to gerrit. > >> >Enter your gerrit username: > >> > > >> > > >> >This output is interesting, because I followed the instructions > to > >> set > >> >the scheme and port to https and 443, > >> > which can be seen from: > >> > > >> >% git config --global -l > >> >user.name <http://user.name>=David Karr > >> >[email protected] > >> >gitreview.scheme=https > >> >gitreview.port=443 > >> > > >> > > >> >Concerning the question ‘Do you have "gerrit" remote already > >> >configured?’, I guess I’d have to say I don’t know. > >> > I’ve followed instructions for setting up my pub key, but I’m > not > >> sure > >> >exactly what is entailed in “gerrit remote”. > >> > > >> >I can get to > >> >https://review.openstack.org/ from my browser and from the > command > >> line > >> >with curl. > >> > > >> >The “ls-remote” command returns without error (or any other > >> output). > >> > > >> >From: Yuriy Taraday [mailto:[email protected]] > >> > > >> >Sent: Thursday, June 11, 2015 9:19 AM > >> >To: OpenStack Development Mailing List (not for usage > questions) > >> >Subject: Re: [openstack-dev] Looking for help getting git- > review > >> to work > >> >over https > >> > > >> > > >> > > >> > > >> > > >> > > >> >On Thu, Jun 11, 2015, 18:09 KARR, DAVID <[email protected]> wrote: > >> > > >> >I could use some help with setting up git-review in a slightly > >> unfriendly > >> >firewall situation. > >> >I'm trying to set up git-review on my CentOS7 VM, and our > firewall > >> blocks > >> >the non-standard ssh port. I'm following the instructions at > >> > > >> > >http://docs.openstack.org/infra/manual/developers.html#accessing- > >> gerrit-ov > >> >er-https > >> > ><http://docs.openstack.org/infra/manual/developers.html#accessing- > >> gerrit-o > >> >ver-https> , for configuring git-review to use https on port > 443, > >> but > >> >this still isn't working (times out with "Could not connect to > >> gerrit"). > >> >I've confirmed that I can reach other > >> > external sites on port 443. > >> >Can someone give me a hand with this? > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> >Hello. > >> > > >> >- Can you please post all output from "git review -vs"? > >> >- Do you have "gerrit" remote already configured? > >> >- Do you have access to > >> >https://review.openstack.org/ <https://review.openstack.org/> > from > >> your > >> >browser? > >> >- Can you access it from command line (via "curl -I > >> >https://review.openstack.org/ <https://review.openstack.org/>" > for > >> >example)? > >> >- Does "git ls-remote > >> >https://review.openstack.org/openstack/nova > >> ><https://review.openstack.org/openstack/nova> > /dev/null" > produce > >> and > >> >error? > >> > > >> > > >> > > >> > > >> > >__________________________________________________________________ > >> ________ > >> >OpenStack Development Mailing List (not for usage questions) > >> >Unsubscribe: > >> >[email protected]?subject:unsubscribe > >> ><http://OpenStack-dev- > >> [email protected]?subject:unsubscribe> > >> >http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack- > dev > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > >__________________________________________________________________ > >> ________ > >> >OpenStack Development Mailing List (not for usage questions) > >> >Unsubscribe: > >> >[email protected]?subject:unsubscribe > >> ><http://OpenStack-dev- > >> [email protected]?subject:unsubscribe> > >> >http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack- > dev > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > >__________________________________________________________________ > >> ________ > >> >OpenStack Development Mailing List (not for usage questions) > >> >Unsubscribe: > >> >[email protected]?subject:unsubscribe > >> ><http://OpenStack-dev- > >> [email protected]?subject:unsubscribe> > >> >http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack- > dev > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > >> > ___________________________________________________________________ > >> _______ > >> OpenStack Development Mailing List (not for usage questions) > >> Unsubscribe: OpenStack-dev- > >> [email protected]?subject:unsubscribe > >> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack- > dev > >__________________________________________________________________ > ________ > >OpenStack Development Mailing List (not for usage questions) > >Unsubscribe: OpenStack-dev- > [email protected]?subject:unsubscribe > >http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev > > ___________________________________________________________________ > _______ > OpenStack Development Mailing List (not for usage questions) > Unsubscribe: OpenStack-dev- > [email protected]?subject:unsubscribe > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: [email protected]?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
