Wow!
And changed the plugin.sh file back to original. However, with a cleaned
devstack (./unstack.sh, ./clean.sh, and removed /opt/stack) I still got the
error I mentioned in my previous post. Full stack log is attached.
Looks like I’ve found this tricky one ;)
In your log:
2015-08-26 21:02:18.010 | + source /home/stack/devstack/extras.d/70-murano.sh
stack post-config
2015-08-26 21:02:18.010 | ++ is_service_enabled murano
2015-08-26 21:02:18.012 | ++ return 0
And this one:
2015-08-26 21:02:41.481 | + [[ -f /opt/stack/murano/devstack/plugin.sh ]]
2015-08-26 21:02:41.481 | + source /opt/stack/murano/devstack/plugin.sh stack
post-config
Murano tried to deploy multiple times. I think this happened because you using
plugin and libs together. Need try to remove murano libs and extras from
devstack directory(lib/murano; lib/murano-dashboard; extras.d/70-murano.sh) or
turn off the plugin. We need to use one method in one time.
As per your suggestion I was going to test your first suggestion, but I was
unable to find any murano service running on my server after the completion of
./stack.sh (which I tested installed murano with it).
The command "sudo service murano status" returns "murano: unrecognized service".
Am I missing something?
In devstack services starts not as daemons, but in screen. To get this
processes view, you need to cd into your devstack dir and launch
./rejoin-stack.sh.
To restart murano, need to move into murano-api and murano-engine screens,
press CTRL-C, and using up arrow launch service, which was stopped.
--
Victor Ryzhenkin
Junior QA Engeneer
freerunner on #freenode
Включено 27 августа 2015 г. в 2:38:11, Vahid S Hashemian
([email protected]) написал:
Hi Victor,
Thank you very much for your detailed response. It was very helpful.
I tried the approach you suggested, and modified the local.conf file by adding
these lines:
MURANO_REPO=/home/stack/workspace/murano
enable_plugin murano https://github.com/openstack/murano
And changed the plugin.sh file back to original. However, with a cleaned
devstack (./unstack.sh, ./clean.sh, and removed /opt/stack) I still got the
error I mentioned in my previous post. Full stack log is attached.
As per your suggestion I was going to test your first suggestion, but I was
unable to find any murano service running on my server after the completion of
./stack.sh (which I tested installed murano with it).
The command "sudo service murano status" returns "murano: unrecognized service".
Am I missing something?
Thanks again for your assistance.
Regards,
-----------------------------------------------------------------------------
Vahid Hashemian, Ph.D.
Advisory Software Engineer, IBM Cloud Labs
Email: [email protected]
Phone: 1-408-463-2380
IBM Silicon Valley Lab
555 Bailey Ave.
San Jose, CA 95141
From: Victor Ryzhenkin <[email protected]>
To: Vahid S Hashemian/Silicon Valley/IBM@IBMUS, "OpenStack Development
Mailing List (not for usage questions)" <[email protected]>
Date: 08/25/2015 05:47 PM
Subject: Re: [openstack-dev] [Murano] Documentation on how to Start
Contributing
Hi, Vahid!
- Modified /home/stack/workspace/murano/devstack/plugin.sh based on Gosha's
suggestion and
replacedMURANO_REPO=${MURANO_REPO:-${GIT_BASE}/openstack/murano.git}withMURANO_REPO=/home/stack/workspace/murano.
Unfortunately, I’m not sure, that using local path as MURANO_REPO will work. At
least, because I never heard about use cases like this.
But looks like you are given it a try. So, I suggest you to make sure, that you
executed ./unstack and ./clean.sh scripts, before start deployment. If you
using clean host, this one not needed.
Also, I think that is not needed to change plugin’s code. You can define
MURANO_REPO=/home/stack/… in your localrc/local.conf file and use
"enable_plugin murano https://github.com/openstack/murano»
What about suggestions, how to test your local changes.
I see a two easy ways to do it without using local repositories.
1. Deploy devstack with murano from master as is using plugin or libs and
replace old files in /opt/stack/murano with new ones, that you changed. After
this need to restart murano services.
2. Upload your changes to gerrit, and use as
MURANO_REPO=https://review.openstack.org/openstack/muranoand
MURANO_BRANCH=<refs/changes/…/.../…>.
Both of methods are good.
But this errors on me when I run ./stack.sh:
ERROR: openstack Conflict occurred attempting to store user - Duplicate
Entry (HTTP 409) (Request-ID: req-805b487c-44fe-4155-8349-65362c2a34ee)
It will be really good, if you can give more information (I mean full, or last
part of deployment log)
Best Regards!
--
Victor Ryzhenkin
Junior QA Engeneer
freerunner on #freenode
Включено 26 августа 2015 г. в 2:49:46, Vahid S Hashemian
([email protected]) написал:
OK. So I'm still having some issues with this.
Here's what I have done:
- Followed instructions on
http://murano.readthedocs.org/en/latest/install/development.htmlup to step 4
* cloned murano into /home/stack/workspace/murano
* cloned devstack into /home/stack/devstack
- Modified /home/stack/workspace/murano/devstack/plugin.sh based on Gosha's
suggestion and replaced
MURANO_REPO=${MURANO_REPO:-${GIT_BASE}/openstack/murano.git}withMURANO_REPO=/home/stack/workspace/murano.
- Modified /home/stack/devstack/local.conf and addedenable_plugin murano
/home/stack/workspace/murano
But this errors on me when I run ./stack.sh:
ERROR: openstack Conflict occurred attempting to store user - Duplicate
Entry (HTTP 409) (Request-ID: req-805b487c-44fe-4155-8349-65362c2a34ee)
I appreciate some clarification. Thanks.
Regards,
-----------------------------------------------------------------------------
Vahid Hashemian, Ph.D.
Advisory Software Engineer, IBM Cloud Labs
From: Vahid S Hashemian/Silicon Valley/IBM@IBMUS
To: "OpenStack Development Mailing List \(not for usage questions\)"
<[email protected]>
Date: 07/10/2015 04:02 PM
Subject: Re: [openstack-dev] [Murano] Documentation on how to
Start Contributing
Thanks Nikolay and Gosha.
As Gosha mentioned I'd like to be able to integrate my local changes to Murano
into my devstack installation.
I figured for UI changes I can probably make the changes directly to the file
and restart my apache2 service.
However, I am looking for an easy way to test back-end changes, like if I had
to modify how a particular CLI behaves, and test it in my devstack environment.
Gosha, thanks for the info you sent. Can you clarify something though?
In local.conf there is a line "enable_plugin
muranohttps://github.com/openstack/murano"; pointing to the Murano's github
repository.
In plugin.sh, on the other hand, there is a line
"MURANO_REPO=${MURANO_REPO:-${GIT_BASE}/openstack/murano.git}" that also
another configuration for Murano repository.
Are these two related? Should I modify both for the purpose I mentioned above?
Also, I cannot find a "murano.git" file on my server (as referenced in line 17
of plugin.sh). Should I use something like "/home/stack/murano/.git" instead?
Thank you again for your help.
Regards,
-----------------------------------------------------------------------------
Vahid Hashemian, Ph.D.
Advisory Software Engineer, IBM Cloud Labs
From: Georgy Okrokvertskhov <[email protected]>
To: "OpenStack Development Mailing List (not for usage questions)"
<[email protected]>
Date: 07/10/2015 07:45 AM
Subject: Re: [openstack-dev] [Murano] Documentation on how to Start
Contributing
Hi,
If I understand correctly, you want to be able to install modified Murano from
your own repository. There is a devstack integration script in Murano
repository which does this. Here are lines where you can point to specific
repository for Murano installation in
devstack:https://github.com/openstack/murano/blob/master/devstack/plugin.sh#L17-L18
Installation procedure in the README.rst file in the folder devstack of murano
repository.
Thanks
Gosha
On Thu, Jul 9, 2015 at 9:54 PM, Nikolay Starodubtsev
<[email protected]> wrote:
Hi,
Can you describe what problems do you have with "bring code changes into a live
Devstack environment, and test them".
If you want a real-time Q&A experience you can ask your questions at #murano on
freenode.
Nikolay Starodubtsev
Software Engineer
Mirantis Inc.
Skype: dark_harlequine1
2015-07-10 2:32 GMT+03:00 Vahid S Hashemian <[email protected]>:
Hello,
I am wondering if there is any documentation for new contributors that explains
how to get up-to-speed with Murano development; something that covers how to
bring code changes into a live Devstack environment, and test them.
I've looked at the Murano documentation online and have not been able to find
it.
Any pointer is very much appreciated.
Thanks.
-----------------------------------------------------------------------------
Vahid Hashemian, Ph.D.
Advisory Software Engineer, IBM Cloud Labs
__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: [email protected]?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: [email protected]?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
--
Georgy Okrokvertskhov
Architect,
OpenStack Platform Products,
Mirantis
http://www.mirantis.com
Tel. +1 650 963 9828
Mob. +1 650 996
3284__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: [email protected]?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: [email protected]?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: [email protected]?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: [email protected]?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
