Hello, Dina,

Currently EVPN L2 networking has not started to design and implemented yet. 
Currently only shared VLAN L2 networking was supported, and is discussing VxLAN 
based L2 networking across OpenStack.

If there are EVPN networking contributors, we can put it into agenda and set 
priority.

Could you help review this patch https://review.openstack.org/#/c/396564/, to 
see if the L2/L3 networking can meet your demand?

Best Regards
Chaoyi Huang ( Joe Huang )

From: dina....@orange.com [mailto:dina....@orange.com]
Sent: Wednesday, November 23, 2016 7:04 PM
To: joehuang; openstack-dev
Subject: RE: [openstack-dev][tricircle]Questions about Tricircle L2 and L3 
implementation

Hello Chaoyi,

Thanks for your answer.

Related to Route Target parameter (RT) : I referred to the figure displaying 
pods interconnection through an E-VPN L2 network ("Tricircle in a nutshell" 
presentation).

My question is : how are there populated and/or exchanged through the E-VPN 
interconnection ?

Thanks,

Best Regards,

            Dina

De : joehuang [mailto:joehu...@huawei.com]
Envoyé : mercredi 23 novembre 2016 04:20
À : SOL Dina IMT/OLN; openstack-dev
Objet : RE: [openstack-dev][tricircle]Questions about Tricircle L2 and L3 
implementation

Hello, Dina,

Thank you for your comments, it'll be good to discuss tricircle related topic 
in openstack-dev so that more people can be involved in if necessary, and keep 
the project transparent. So I copied the reply to  
openstack-dev@lists.openstack.org<mailto:openstack-dev@lists.openstack.org>.

For L2VxLAN, the VNI identifiers will be allocated in central Neutron, and then 
same VNI segment will be used for local Neutron during get_network or get_port 
from Nova, the local plugin in local Neutron will query the network segment 
info. and persist same uuid and VNI in local Neutron. But VxLAN based cross 
Neutron L2 networking has not started yet, the spec has not submitted for 
review yet, currently only VLAN based L2/L3 networking were implemented, 
supported features could be found in the release 
notes:https://github.com/openstack/tricircle/blob/master/releasenotes/notes/initial-release-notes.yaml
 .

 VxLAN L2 networking and VxLAN as the bridge network for L3 networking will 
rely on the patch for "formalize the tunnel termination point by adding it to 
the port binding data model" which is mentioned in "Eliminating L2pop as a 
mechanism driver" 
http://lists.openstack.org/pipermail/openstack-dev/2016-November/107061.html

Before VxLAN L2 networking and VxLAN as the bridge network for L3 networking, 
this spec is being reviewed, https://review.openstack.org/#/c/396564/, please 
join the review to see whether it can meet your demands, especially for the 
cross Neutron networking models.

What is "RT parameters"?

Tricircle supported L3 networking based on shared VLAN bridge network, you can 
refer to "6.6  L3 Networking across Neutron", but just as what mentioned in the 
release notes,  only VLAN L2 network and shared VLAN as the bridge network for 
L3 networking are supported.

There are todo list for the usage documentation in ocata release, you are 
welcome to join the contribution, no matter documentation or source code or 
review.

Best Regards
Chaoyi Huang (joehuang)
________________________________
From: dina....@orange.com<mailto:dina....@orange.com> [dina....@orange.com]
Sent: 22 November 2016 21:54
To: joehuang
Subject: Questions about Tricircle L2 and L3 implementation
Hello Chaoyi Huang,

I have read Tricirle wiki documentation and some presentations.
May I ask you I have few questions about Tricircle implementation ?
Here there are :

1°) L2 VxLAN
How are choosen VNI identifiers ?
How are choosen RT parameters ? Is a control plane used or all is configured 
within a pool ?

2°) L3
Does Tricircle support L3 interconnection ?
Have you documentation about that ?

Thanks,
Best Regards,

            Dina SOL
--------------------------------
[logo-Orange]
Dina Sol
Orange/ IMT/ OLN/ WTC/ IEE/ NAVI (Network Automation and Virtualized 
Infrastructure)
Orange Labs
2, avenue Pierre Marzin
22307 Lannion Cedex
tel : 00 33 (0)2 96 07 11 22
dina....@orange.com<mailto:dina....@orange-ftgroup.com>



_________________________________________________________________________________________________________________________



Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc

pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler

a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,

Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.



This message and its attachments may contain confidential or privileged 
information that may be protected by law;

they should not be distributed, used or copied without authorisation.

If you have received this email in error, please notify the sender and delete 
this message and its attachments.

As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.

Thank you.

_________________________________________________________________________________________________________________________



Ce message et ses pieces jointes peuvent contenir des informations 
confidentielles ou privilegiees et ne doivent donc

pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce 
message par erreur, veuillez le signaler

a l'expediteur et le detruire ainsi que les pieces jointes. Les messages 
electroniques etant susceptibles d'alteration,

Orange decline toute responsabilite si ce message a ete altere, deforme ou 
falsifie. Merci.



This message and its attachments may contain confidential or privileged 
information that may be protected by law;

they should not be distributed, used or copied without authorisation.

If you have received this email in error, please notify the sender and delete 
this message and its attachments.

As emails may be altered, Orange is not liable for messages that have been 
modified, changed or falsified.

Thank you.
__________________________________________________________________________
OpenStack Development Mailing List (not for usage questions)
Unsubscribe: openstack-dev-requ...@lists.openstack.org?subject:unsubscribe
http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev

Reply via email to