HI Andreas,
Thanks for your reply. I have no specific reason for using this network configuration in local.conf. I have only basic knowledge of these config options even. This local.conf network configurations used to work well with earlier devstack openstack versions. So i did not change it.. Just this time its creating trouble. I have not created any ovs bridge manually before running devstack. just created this local.conf and ran ./stack.sh in devstack folder. Can you please suggest changes if i have not created ovs-bridge manually. At present my settings are - from local.conf - for reference - FIXED_RANGE=10.11.12.0/24 NETWORK_GATEWAY=10.11.12.1 FIXED_NETWORK_SIZE=256 FLOATING_RANGE=10.0.2.0/24 Q_FLOATING_ALLOCATION_POOL=start=10.0.2.104,end=10.0.2.111 PUBLIC_NETWORK_GATEWAY=10.0.2.1 HOST_IP=10.0.2.15 PUBLIC_INTERFACE=eth0 Q_USE_SECGROUP=True ENABLE_TENANT_VLANS=True TENANT_VLAN_RANGE=1000:1999 PHYSICAL_NETWORK=default OVS_PHYSICAL_BRIDGE=br-ex Q_USE_PROVIDER_NETWORKING=True Q_L3_ENABLED=False PROVIDER_SUBNET_NAME="provider_net" PROVIDER_NETWORK_TYPE="vlan" SEGMENTATION_ID=2010 Thanks Nidhi ________________________________ From: Andreas Scheuring <[email protected]> Sent: Wednesday, January 18, 2017 1:09:17 PM To: [email protected] Subject: Re: [openstack-dev] [OpenStack-Dev][DevStack][Neutron] facing problem in devstack install - No Network found for private ** This mail has been sent from an external source ** Without looking into the details.... you're specifying Q_USE_PROVIDER_NETWORKING=True in your local.conf - usually this results in the creation of a single provider network called "public". But the manila devstack plugin seems not to be able to deal with provider networks as it's expecting a network named "private" to be present. Why are you using provider networks? Just for sake of VLANs? You can also configure devstack to use vlans with the default setup. This has worked for me in the past - results in a private network using vlans (assuming you have created ovs b bridge br-data manually): OVS_PHYSICAL_BRIDGE=br-data PHYSICAL_NETWORK=phys-data ENABLE_TENANT_TUNNELS=False Q_ML2_TENANT_NETWORK_TYPE=vlan ENABLE_TENANT_VLANS=True TENANT_VLAN_RANGE=1000:1000 -- ----- Andreas IRC: andreas_s On Mi, 2017-01-18 at 06:59 +0000, [email protected] wrote: > Hi All, > > > I was trying to install latest Newton version of OpenStack using > devstack on my laptop, all in one machine, > > using Virtualbox VM. Lately i have been facing same problem in last > few tries and installation doesn't get successful. > > > My VM network adapter configuration is as below. > > > Adapter1 > > > > > > > > and 2nd adapter is as > > Adapter2 > > > > > > > > Thats detail of Host Only Networking > > > > > > > > > > > > > > Thats my local.conf for devstack > > > > http://paste.openstack.org/show/595313/ > > > > > excerpt is > > FIXED_RANGE=10.11.12.0/24 > > > NETWORK_GATEWAY=10.11.12.1 > FIXED_NETWORK_SIZE=256 > > > FLOATING_RANGE=10.0.2.0/24 > Q_FLOATING_ALLOCATION_POOL=start=10.0.2.104,end=10.0.2.111 > PUBLIC_NETWORK_GATEWAY=10.0.2.1 > HOST_IP=10.0.2.15 > > > PUBLIC_INTERFACE=eth0 > > > > Thats ubuntu version on VM > stack@ubuntu:~/devstack$ lsb_release -d > Description: Ubuntu 14.04.5 LTS > stack@ubuntu:~/devstack$ > > > Thats my machine's network interfaces file > > > stack@ubuntu:~/devstack$ cat /etc/network/interfaces > > > # This file describes the network interfaces available on your system > # and how to activate them. For more information, see interfaces(5). > > > # The loopback network interface > auto lo > iface lo inet loopback > > > # The primary network interface > auto eth1 > iface eth1 inet static > address 192.168.56.150 > netmask 255.255.255.0 > > > auto eth0 > iface eth0 inet dhcp > stack@ubuntu:~/devstack$ > > > > Error I am facing is > > > http://paste.openstack.org/show/595315/ > > > > Excerpt is > > > 2017-01-18 06:29:55.396 | > +++ /opt/stack/manila/devstack/plugin.sh:create_service_share_servers:287 : > openstack network show private -f value -c id > 2017-01-18 06:29:56.778 | ResourceNotFound: No Network found for > private > 2017-01-18 06:29:56.805 | > ++ /opt/stack/manila/devstack/plugin.sh:create_service_share_servers:287 : > private_net_id= > 2017-01-18 06:29:56.807 | > + /opt/stack/manila/devstack/plugin.sh:create_service_share_servers:1 : > exit_trap > 2017-01-18 06:29:56.809 | + ./stack.sh:exit_trap:487 : > local r=1 > 2017-01-18 06:29:56.815 | ++ ./stack.sh:exit_trap:488 > : jobs -p > 2017-01-18 06:29:56.817 | + ./stack.sh:exit_trap:488 : > jobs= > 2017-01-18 06:29:56.819 | + ./stack.sh:exit_trap:491 : > [[ -n '' ]] > 2017-01-18 06:29:56.821 | + ./stack.sh:exit_trap:497 : > kill_spinner > 2017-01-18 06:29:56.823 | + ./stack.sh:kill_spinner:383 : > '[' '!' -z '' ']' > 2017-01-18 06:29:56.824 | + ./stack.sh:exit_trap:499 : > [[ 1 -ne 0 ]] > 2017-01-18 06:29:56.826 | + ./stack.sh:exit_trap:500 : > echo 'Error on exit' > 2017-01-18 06:29:56.826 | Error on exit > 2017-01-18 06:29:56.828 | + ./stack.sh:exit_trap:501 : > generate-subunit 1484720095 901 fail > 2017-01-18 06:29:57.844 | + ./stack.sh:exit_trap:502 : > [[ -z /opt/stack/logs ]] > 2017-01-18 06:29:57.846 | + ./stack.sh:exit_trap:505 > : /home/stack/devstack/tools/worlddump.py -d /opt/stack/logs > 2017-01-18 06:30:03.325 | + ./stack.sh:exit_trap:511 : > exit 1 > > > > Devstack does not scucceed at all i have tried couple of times. > > > Can someone help in pointing what mistake i am making that private > network is not getting created. > > I do not need to use generic driver for manila share at all i can skip > that option also. > > > Any kind of input will be really helpful. > > > Thanks > > Nidhi > > > > > > > > > > > > > > > > The information contained in this electronic message and any > attachments to this message are intended for the exclusive use of the > addressee(s) and may contain proprietary, confidential or privileged > information. If you are not the intended recipient, you should not > disseminate, distribute or copy this e-mail. Please notify the sender > immediately and destroy all copies of this message and any > attachments. WARNING: Computer viruses can be transmitted via email. > The recipient should check this email and any attachments for the > presence of viruses. The company accepts no liability for any damage > caused by any virus transmitted by this email. > www.wipro.com<http://www.wipro.com> > __________________________________________________________________________ > OpenStack Development Mailing List (not for usage questions) > Unsubscribe: [email protected]?subject:unsubscribe > http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev __________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: [email protected]?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com
__________________________________________________________________________ OpenStack Development Mailing List (not for usage questions) Unsubscribe: [email protected]?subject:unsubscribe http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-dev
