Hi All, I am trying to upgrade a multinode cluster that has been very valuable in our environment.
The idea was to start at trusty/mitaka and get to xenial/newton. Step1 mitaka -> newton on a trusty environment went fine. Step2 trusty to xenial is not going well and I could use some help. So far I rebuilt the 1st of 3 infra nodes with Xenial. Then re-ran setup-hosts, setup-infrastructure, setup-openstack. All playbooks ran fairly clean ( relative to the current issue ) - HOWEVER the services don't actually start on the Xenial / 16.04 based containers. They just keep dying. Example error from a glance container here: http://pastebin.com/E6DvWdHy I jumped on IRC and "logan" was nice enough to help. We deleted the glance container, cleared ansible_facts and rebuilt. Same errors though. "logan" mentioned that he thought since the repo-build / requirement wheels were getting built on a trusty base / container that the wheels / venvs that make it to the 16.04 container are not compatible. So, can anyone advise on how to proceed ? Is there someway to not use the repo_server for the 16.04 hosts, then when all infra is at 16.04 re-enable the repo_server. Just brain storming. Any help would be very welcome. Best Regards, Wade [email protected] irc: wadeholler _______________________________________________ OpenStack-operators mailing list [email protected] http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack-operators
