Hi Guilherme, I recently also encountered similar issue. I ended up finding that I wrongly setup the EXT_GW_IP (ip of br-ex) in the network node. Furthermore, I only restarted the quantum processes, but not the openvswitch-switch after I fixed the script that I modified from the official site.
I also followed https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/stable/GRE/OpenStack_Folsom_Install_Guide_WebVersion.rst to ensure the setting of the quantum part on the network node. There may be a typo in the link. The typo is that the metadata_id in /etc/quantum/l3_agent.ini should be the 100.10.10.51. Then you can do ssh -i to the VM. Sincerely, Hsiao On Tue, Feb 26, 2013 at 8:29 PM, Guilherme Russi <[email protected]> wrote: > Hello Dan, thanks for answering, I re-installed my OS and now it's working > fine, my only problem now is attaching IP to the VMs :( > > I'll try the config from this tutorial: > https://github.com/mseknibilel/OpenStack-Folsom-Install-guide/blob/VLAN/2NICs/OpenStack_Folsom_Install_Guide_WebVersion.rst > > > 2013/2/26 Dan Wendlandt <[email protected]> >> >> Can you use ps and netstat to confirm that quantum-server is running and >> listening on port 9696 on your controller node? It seems like the quantum >> IP and port provided to horizon to reach quantum do not point to a running >> quantum server. >> >> dan >> >> >> On Fri, Feb 22, 2013 at 10:13 AM, Guilherme Russi >> <[email protected]> wrote: >>> >>> Here is my network config from my Controller + Network Node >>> >>> ifconfig -a >>> br-ex Link encap:Ethernet Endereço de HW 26:a0:a9:72:d6:4c >>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>> pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 >>> Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 >>> colisões:0 txqueuelen:0 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> br-int Link encap:Ethernet Endereço de HW c2:fe:d6:34:d2:47 >>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>> pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 >>> Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 >>> colisões:0 txqueuelen:0 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> br-tun Link encap:Ethernet Endereço de HW e6:28:ea:a1:13:4d >>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>> pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 >>> Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 >>> colisões:0 txqueuelen:0 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> eth0 Link encap:Ethernet Endereço de HW 1c:7e:e5:2d:2a:30 >>> inet end.: 192.168.3.1 Bcast:192.168.3.255 Masc:255.255.255.0 >>> endereço inet6: fe80::1e7e:e5ff:fe2d:2a30/64 Escopo:Link >>> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Métrica:1 >>> pacotes RX:636078 erros:0 descartados:4197 excesso:0 quadro:0 >>> Pacotes TX:521719 erros:0 descartados:0 excesso:0 portadora:0 >>> colisões:0 txqueuelen:1000 >>> RX bytes:149705070 (149.7 MB) TX bytes:409745649 (409.7 MB) >>> IRQ:16 >>> >>> eth0:0 Link encap:Ethernet Endereço de HW 1c:7e:e5:2d:2a:30 >>> inet end.: 10.10.10.1 Bcast:10.10.10.255 Masc:255.255.255.0 >>> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Métrica:1 >>> IRQ:16 >>> >>> eth0:1 Link encap:Ethernet Endereço de HW 1c:7e:e5:2d:2a:30 >>> inet end.: 192.168.3.7 Bcast:192.168.3.255 Masc:255.255.255.0 >>> UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Métrica:1 >>> IRQ:16 >>> >>> eth1 Link encap:Ethernet Endereço de HW 38:60:77:60:b8:01 >>> inet end.: 10.3.77.51 Bcast:10.3.77.255 Masc:255.255.255.0 >>> endereço inet6: fe80::3a60:77ff:fe60:b801/64 Escopo:Link >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Métrica:1 >>> pacotes RX:11707638 erros:0 descartados:0 excesso:0 quadro:0 >>> Pacotes TX:13933599 erros:0 descartados:0 excesso:0 portadora:0 >>> colisões:0 txqueuelen:1000 >>> RX bytes:7376128573 (7.3 GB) TX bytes:12603147639 (12.6 GB) >>> IRQ:20 Memória:f7d00000-f7d20000 >>> >>> lo Link encap:Loopback Local >>> inet end.: 127.0.0.1 Masc:255.0.0.0 >>> endereço inet6: ::1/128 Escopo:Máquina >>> UP LOOPBACK RUNNING MTU:16436 Métrica:1 >>> pacotes RX:2183072 erros:0 descartados:0 excesso:0 quadro:0 >>> Pacotes TX:2183072 erros:0 descartados:0 excesso:0 portadora:0 >>> colisões:0 txqueuelen:0 >>> RX bytes:829022302 (829.0 MB) TX bytes:829022302 (829.0 MB) >>> >>> qg-95fe3fa1-d1 Link encap:Ethernet Endereço de HW 7a:ba:eb:95:24:db >>> inet end.: 10.10.0.130 Bcast:10.10.0.255 Masc:255.255.255.0 >>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>> pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 >>> Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 >>> colisões:0 txqueuelen:0 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> qr-ea64e9aa-31 Link encap:Ethernet Endereço de HW 82:63:fa:73:4b:34 >>> inet end.: 10.5.5.1 Bcast:10.5.5.255 Masc:255.255.255.0 >>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>> pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 >>> Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 >>> colisões:0 txqueuelen:0 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> tap817d2f70-a0 Link encap:Ethernet Endereço de HW 2e:f6:84:a0:3e:d8 >>> inet end.: 10.5.5.2 Bcast:10.5.5.255 Masc:255.255.255.0 >>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>> pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 >>> Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 >>> colisões:0 txqueuelen:0 >>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>> >>> >>> I am following this tutorial: >>> >>> >>> http://docs.openstack.org/folsom/basic-install/content/basic-install_requirements.html >>> >>> It requires 3 NICs in the network node, but i don't have a network node >>> separated, my controller and my network nodes are at the same machine with 2 >>> NICs, so, I created virtual interfaces eth0:0 and eth0:1, the eth0:0 is >>> supose to be the Data Network (showed in the tutorial) and the eth0:1 is >>> supose to be the Public Bridge with the promisc config. >>> My compute nodes have 2 NICs too. I guess i'm messing up the network >>> configuration, anyway, all the infos you need, let me know. >>> >>> Thank you so much. >>> >>> Guilherme. >>> >>> 2013/2/22 Anil Vishnoi <[email protected]> >>>> >>>> can you tell me brief about your setup. I might need a bit more info >>>> once i understand your setup. >>>> >>>> >>>> On Fri, Feb 22, 2013 at 12:41 AM, Guilherme Russi >>>> <[email protected]> wrote: >>>>> >>>>> Hello Anil, >>>>> >>>>> I re-installed the OpenStack Controller and now it's working, my only >>>>> problem is that my VMs aren't getting IP, when I type ifconfi -a my VM's >>>>> eth0 doesn't have IP. >>>>> >>>>> The VM's log shows this: >>>>> >>>>> Starting network... >>>>> udhcpc (v1.18.5) started >>>>> Sending discover... >>>>> Sending discover... >>>>> Sending discover... >>>>> No lease, failing >>>>> WARN: /etc/rc3.d/S40-network failed >>>>> >>>>> >>>>> Do you have any idea, I'll send the problem to openstack group too. >>>>> >>>>> Thanks. >>>>> >>>>> Guilherme. >>>>> >>>>> 2013/2/21 Anil Vishnoi <[email protected]> >>>>>> >>>>>> sure >>>>>> >>>>>> >>>>>> On Thu, Feb 21, 2013 at 6:08 PM, Guilherme Russi >>>>>> <[email protected]> wrote: >>>>>>> >>>>>>> Hello Anil, >>>>>>> >>>>>>> I looked at the logs and everything I tried over the internet didn't >>>>>>> work, so, I'm installing again the ubuntu server. >>>>>>> I'll let you know when I finish and try again. >>>>>>> >>>>>>> Thank you so much for your support. >>>>>>> >>>>>>> Regards. >>>>>>> >>>>>>> Guilherme. >>>>>>> >>>>>>> >>>>>>> 2013/2/21 Anil Vishnoi <[email protected]> >>>>>>>> >>>>>>>> as per my experience your quantum-server is crashing while starting, >>>>>>>> check the logs of the quntum-server you will see some error stack >>>>>>>> trace. >>>>>>>> >>>>>>>> >>>>>>>> On Thu, Feb 21, 2013 at 2:12 AM, Guilherme Russi >>>>>>>> <[email protected]> wrote: >>>>>>>>> >>>>>>>>> I used a purge command with quantum*, I made the configuration >>>>>>>>> again, but now when I type /ect/init.d/quantum-server start it writes >>>>>>>>> the >>>>>>>>> process is running, but when I look for a status, >>>>>>>>> /etc/init.d/quantum-server >>>>>>>>> status, it show stopped. >>>>>>>>> >>>>>>>>> Any idea about that issue now? >>>>>>>>> >>>>>>>>> Thanks again. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> 2013/2/20 Guilherme Russi <[email protected]> >>>>>>>>>> >>>>>>>>>> My configs are the same :) >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2013/2/20 Anil Vishnoi <[email protected]> >>>>>>>>>>> >>>>>>>>>>> In my openstack system, in /etc/quantum/quantum.conf file i have >>>>>>>>>>> the following configuration >>>>>>>>>>> >>>>>>>>>>> # Address to bind the API server >>>>>>>>>>> bind_host = 0.0.0.0 >>>>>>>>>>> >>>>>>>>>>> # Port the bind the API server to >>>>>>>>>>> bind_port = 9696 >>>>>>>>>>> >>>>>>>>>>> do you have the same configuration? if not can you change this >>>>>>>>>>> and restart quantum-server and try. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Wed, Feb 20, 2013 at 11:59 PM, Guilherme Russi >>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Both are at the same node, the IP 192.168.3.1 is from my eth0 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> 2013/2/20 Anil Vishnoi <[email protected]> >>>>>>>>>>>>> >>>>>>>>>>>>> BTW just noticed one thing, >>>>>>>>>>>>> >>>>>>>>>>>>> keystone url : http://localhost:5000/v2.0/tokens >>>>>>>>>>>>> and >>>>>>>>>>>>> quanum -server url : http://192.168.3.1:9696/v2.0/ >>>>>>>>>>>>> >>>>>>>>>>>>> both of these services are running on different nodes ? if they >>>>>>>>>>>>> are running on the same node, do we have this IP 192.168.3.1 >>>>>>>>>>>>> assigned to any >>>>>>>>>>>>> interface of the controller host? >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Wed, Feb 20, 2013 at 11:43 PM, Guilherme Russi >>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> I'm still getting the error. I don't know what to do anymore >>>>>>>>>>>>>> :S >>>>>>>>>>>>>> >>>>>>>>>>>>>> Do you have any others ideas? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2013/2/20 Guilherme Russi <[email protected]> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> root@erebo:/home-09/luisrussi# service quantum-server restart >>>>>>>>>>>>>>> quantum-server stop/waiting >>>>>>>>>>>>>>> quantum-server start/running, process 27798 >>>>>>>>>>>>>>> root@erebo:/home-09/luisrussi# service >>>>>>>>>>>>>>> quantum-plugin-openvswitch-agent restart >>>>>>>>>>>>>>> quantum-plugin-openvswitch-agent stop/waiting >>>>>>>>>>>>>>> quantum-plugin-openvswitch-agent start/running, process 27820 >>>>>>>>>>>>>>> root@erebo:/home-09/luisrussi# service quantum-dhcp-agent >>>>>>>>>>>>>>> restart >>>>>>>>>>>>>>> quantum-dhcp-agent stop/waiting >>>>>>>>>>>>>>> quantum-dhcp-agent start/running, process 27959 >>>>>>>>>>>>>>> root@erebo:/home-09/luisrussi# service quantum-l3-agent >>>>>>>>>>>>>>> restart >>>>>>>>>>>>>>> quantum-l3-agent stop/waiting >>>>>>>>>>>>>>> quantum-l3-agent start/running, process 27973 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Am I forgeting any service? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2013/2/20 Anil Vishnoi <[email protected]> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> you want to clear up your quantum database ? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Then i would suggest first delete all the network you >>>>>>>>>>>>>>>> created through horizon/CLI and then you can log-in to mysql. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> mysql -u root -p >>>>>>>>>>>>>>>> enter the password >>>>>>>>>>>>>>>> connect <quantum database name>; >>>>>>>>>>>>>>>> show tables; >>>>>>>>>>>>>>>> select * from <table name>; >>>>>>>>>>>>>>>> delete from <table name>; >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> You will have to cleanup all your tables ( its better to >>>>>>>>>>>>>>>> first look at hte content and delete). >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Its better if you stop all quantum services before you do >>>>>>>>>>>>>>>> this activity. Once you are done with cleanup, just start the >>>>>>>>>>>>>>>> quantum >>>>>>>>>>>>>>>> services, and sometime even you have to again restart the >>>>>>>>>>>>>>>> services to make >>>>>>>>>>>>>>>> it work. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> let me know if it helps. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Feb 20, 2013 at 11:24 PM, Guilherme Russi >>>>>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Ok, I'll restart all quantum services, do you know how I >>>>>>>>>>>>>>>>> can clean up my database, I haven't found over the internet. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 2013/2/20 Anil Vishnoi <[email protected]> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> keystone looks fine to me, and logs says that it fetches >>>>>>>>>>>>>>>>>> authentication token from keystone and then trying to fetch >>>>>>>>>>>>>>>>>> network list >>>>>>>>>>>>>>>>>> from quantum service and its failing . >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Last suggestion i have is to restart all the quantum >>>>>>>>>>>>>>>>>> services (mainly quantum-server) and see if it help, else as >>>>>>>>>>>>>>>>>> of now i am >>>>>>>>>>>>>>>>>> running out of idea :). Might need to dig deeper in the logs. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Anil >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Feb 20, 2013 at 11:11 PM, Guilherme Russi >>>>>>>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Here is the output: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> quantum -v net-list >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.quantum.v2_0.network.ListNetwork >>>>>>>>>>>>>>>>>>> get_data(Namespace(columns=[], fields=[], filter_specs=[], >>>>>>>>>>>>>>>>>>> formatter='table', quote_mode='nonnumeric', >>>>>>>>>>>>>>>>>>> request_format='json', >>>>>>>>>>>>>>>>>>> show_details=False)) >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.client REQ: curl -i >>>>>>>>>>>>>>>>>>> http://localhost:5000/v2.0/tokens -X POST -H "Content-Type: >>>>>>>>>>>>>>>>>>> application/json" -H "Accept: application/json" -H >>>>>>>>>>>>>>>>>>> "User-Agent: >>>>>>>>>>>>>>>>>>> python-quantumclient" >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.client REQ BODY: {"auth": >>>>>>>>>>>>>>>>>>> {"tenantName": "admin", "passwordCredentials": {"username": >>>>>>>>>>>>>>>>>>> "admin", >>>>>>>>>>>>>>>>>>> "password": "password"}}} >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.client RESP:{'date': 'Wed, 20 Feb >>>>>>>>>>>>>>>>>>> 2013 17:38:54 GMT', 'transfer-encoding': 'chunked', >>>>>>>>>>>>>>>>>>> 'status': '200', >>>>>>>>>>>>>>>>>>> 'content-type': 'application/json', 'vary': 'X-Auth-Token'} >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.client RESP BODY:{"access": >>>>>>>>>>>>>>>>>>> {"token": {"expires": "2013-02-21T17:38:54Z", "id": >>>>>>>>>>>>>>>>>>> "47db867d4e764f6883dfcd97a116cc5f", "tenant": {"enabled": >>>>>>>>>>>>>>>>>>> true, >>>>>>>>>>>>>>>>>>> "description": null, "name": "admin", "id": >>>>>>>>>>>>>>>>>>> "fbecb917e45c42089119244ff4fbcf58"}}, "serviceCatalog": >>>>>>>>>>>>>>>>>>> [{"endpoints": >>>>>>>>>>>>>>>>>>> [{"adminURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8774/v2/fbecb917e45c42089119244ff4fbcf58";, >>>>>>>>>>>>>>>>>>> "region": "RegionOne", "internalURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8774/v2/fbecb917e45c42089119244ff4fbcf58";, >>>>>>>>>>>>>>>>>>> "id": >>>>>>>>>>>>>>>>>>> "46d35197c03a42a49383d7108433bd31", "publicURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8774/v2/fbecb917e45c42089119244ff4fbcf58"}], >>>>>>>>>>>>>>>>>>> "endpoints_links": [], "type": "compute", "name": "nova"}, >>>>>>>>>>>>>>>>>>> {"endpoints": >>>>>>>>>>>>>>>>>>> [{"adminURL": "http://192.168.3.1:9696/";, "region": >>>>>>>>>>>>>>>>>>> "RegionOne", >>>>>>>>>>>>>>>>>>> "internalURL": "http://192.168.3.1:9696/";, "id": >>>>>>>>>>>>>>>>>>> "658b2ca29b7f471e8e1975163ca24a03", "publicURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:9696/"}], "endpoints_links": [], >>>>>>>>>>>>>>>>>>> "type": "network", >>>>>>>>>>>>>>>>>>> "name": "quantum"}, {"endpoints": [{"adminURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:9292/v2";, "region": "RegionOne", >>>>>>>>>>>>>>>>>>> "internalURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:9292/v2";, "id": >>>>>>>>>>>>>>>>>>> "7612e4eb684649d695418f797302dbc0", >>>>>>>>>>>>>>>>>>> "publicURL": "http://192.168.3.1:9292/v2"}], >>>>>>>>>>>>>>>>>>> "endpoints_links": [], "type": >>>>>>>>>>>>>>>>>>> "image", "name": "glance"}, {"endpoints": [{"adminURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8776/v1/fbecb917e45c42089119244ff4fbcf58";, >>>>>>>>>>>>>>>>>>> "region": >>>>>>>>>>>>>>>>>>> "RegionOne", "internalURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8776/v1/fbecb917e45c42089119244ff4fbcf58";, >>>>>>>>>>>>>>>>>>> "id": >>>>>>>>>>>>>>>>>>> "deaccc456cd1470c91cd2de061a9a3ed", "publicURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8776/v1/fbecb917e45c42089119244ff4fbcf58"}], >>>>>>>>>>>>>>>>>>> "endpoints_links": [], "type": "volume", "name": "cinder"}, >>>>>>>>>>>>>>>>>>> {"endpoints": >>>>>>>>>>>>>>>>>>> [{"adminURL": "http://192.168.3.1:8773/services/Admin";, >>>>>>>>>>>>>>>>>>> "region": >>>>>>>>>>>>>>>>>>> "RegionOne", "internalURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8773/services/Cloud";, "id": >>>>>>>>>>>>>>>>>>> "90d8be226ca0406ca920ddd0747ce73e", "publicURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8773/services/Cloud"}], >>>>>>>>>>>>>>>>>>> "endpoints_links": [], "type": >>>>>>>>>>>>>>>>>>> "ec2", "name": "ec2"}, {"endpoints": [{"adminURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8080/v1";, "region": "RegionOne", >>>>>>>>>>>>>>>>>>> "internalURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8080/v1/AUTH_fbecb917e45c42089119244ff4fbcf58";, >>>>>>>>>>>>>>>>>>> "id": >>>>>>>>>>>>>>>>>>> "b37b3564b30d456f94ffd4b9b7019f8f", "publicURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:8080/v1/AUTH_fbecb917e45c42089119244ff4fbcf58"}], >>>>>>>>>>>>>>>>>>> "endpoints_links": [], "type": "object-store", "name": >>>>>>>>>>>>>>>>>>> "swift"}, >>>>>>>>>>>>>>>>>>> {"endpoints": [{"adminURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:35357/v2.0";, "region": >>>>>>>>>>>>>>>>>>> "RegionOne", "internalURL": "http://192.168.3.1:5000/v2.0";, >>>>>>>>>>>>>>>>>>> "id": >>>>>>>>>>>>>>>>>>> "321f8265ee45479dae92377746be0554", "publicURL": >>>>>>>>>>>>>>>>>>> "http://192.168.3.1:5000/v2.0"}], "endpoints_links": [], >>>>>>>>>>>>>>>>>>> "type": "identity", >>>>>>>>>>>>>>>>>>> "name": "keystone"}], "user": {"username": "admin", >>>>>>>>>>>>>>>>>>> "roles_links": [], "id": >>>>>>>>>>>>>>>>>>> "ef42c58fe810472bbcbac636292c2092", "roles": [{"name": >>>>>>>>>>>>>>>>>>> "KeystoneServiceAdmin"}, {"name": "admin"}, {"name": >>>>>>>>>>>>>>>>>>> "KeystoneAdmin"}], >>>>>>>>>>>>>>>>>>> "name": "admin"}, "metadata": {"is_admin": 0, "roles": >>>>>>>>>>>>>>>>>>> ["53520998dfd54ae592174a5dc559e342", >>>>>>>>>>>>>>>>>>> "3260291f28074b00bc55dee066232bcd", >>>>>>>>>>>>>>>>>>> "4e6d0851dba64c4fbfb8352af3b8851b"]}}} >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.quantum.v2_0.network.ListNetwork >>>>>>>>>>>>>>>>>>> search options: {} >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.client REQ: curl -i >>>>>>>>>>>>>>>>>>> http://192.168.3.1:9696/v2.0/networks.json -X GET -H >>>>>>>>>>>>>>>>>>> "User-Agent: >>>>>>>>>>>>>>>>>>> python-quantumclient" -H "Content-Type: application/json" >>>>>>>>>>>>>>>>>>> -H "Accept: >>>>>>>>>>>>>>>>>>> application/json" -H "X-Auth-Token: >>>>>>>>>>>>>>>>>>> 47db867d4e764f6883dfcd97a116cc5f" >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.client RESP:{'status': '400', >>>>>>>>>>>>>>>>>>> 'content-length': 30, 'content-type': 'text/plain'} >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.client RESP BODY:[Errno 111] >>>>>>>>>>>>>>>>>>> Connection refused >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.v2_0.client Error message: [Errno >>>>>>>>>>>>>>>>>>> 111] Connection refused >>>>>>>>>>>>>>>>>>> ERROR: cliff.app [Errno 111] Connection refused >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.shell clean_up ListNetwork >>>>>>>>>>>>>>>>>>> DEBUG: quantumclient.shell got an error: [Errno 111] >>>>>>>>>>>>>>>>>>> Connection refused >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 2013/2/20 Anil Vishnoi <[email protected]> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> quantum -v net-list >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Above command might give you more info on where its >>>>>>>>>>>>>>>>>>>> failing. At this point of time i can suspect keystone or >>>>>>>>>>>>>>>>>>>> quantum services. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Wed, Feb 20, 2013 at 10:53 PM, Guilherme Russi >>>>>>>>>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Which list from ovs-vsctl do you want, and here is my >>>>>>>>>>>>>>>>>>>>> ifconfig -a: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> br-eth2 Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 9e:23:39:6e:53:40 >>>>>>>>>>>>>>>>>>>>> inet end.: 192.168.3.6 Bcast:192.168.3.255 >>>>>>>>>>>>>>>>>>>>> Masc:255.255.255.0 >>>>>>>>>>>>>>>>>>>>> endereço inet6: fe80::9c23:39ff:fe6e:5340/64 >>>>>>>>>>>>>>>>>>>>> Escopo:Link >>>>>>>>>>>>>>>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 >>>>>>>>>>>>>>>>>>>>> Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:69 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:0 >>>>>>>>>>>>>>>>>>>>> RX bytes:0 (0.0 B) TX bytes:11114 (11.1 KB) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> br-ex Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> d6:35:ea:33:df:47 >>>>>>>>>>>>>>>>>>>>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:0 >>>>>>>>>>>>>>>>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> br-int Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 5e:0c:7a:dd:96:47 >>>>>>>>>>>>>>>>>>>>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:0 >>>>>>>>>>>>>>>>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> br-tun Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 2e:4f:62:19:3b:4e >>>>>>>>>>>>>>>>>>>>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:0 >>>>>>>>>>>>>>>>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> eth0 Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 1c:7e:e5:2d:2a:30 >>>>>>>>>>>>>>>>>>>>> inet end.: 192.168.3.1 Bcast:192.168.3.255 >>>>>>>>>>>>>>>>>>>>> Masc:255.255.255.0 >>>>>>>>>>>>>>>>>>>>> endereço inet6: fe80::1e7e:e5ff:fe2d:2a30/64 >>>>>>>>>>>>>>>>>>>>> Escopo:Link >>>>>>>>>>>>>>>>>>>>> UP BROADCAST RUNNING PROMISC MULTICAST >>>>>>>>>>>>>>>>>>>>> MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:53770 erros:0 descartados:529 >>>>>>>>>>>>>>>>>>>>> excesso:0 quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:24606 erros:0 descartados:0 >>>>>>>>>>>>>>>>>>>>> excesso:0 portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:1000 >>>>>>>>>>>>>>>>>>>>> RX bytes:16172066 (16.1 MB) TX bytes:12956653 >>>>>>>>>>>>>>>>>>>>> (12.9 MB) >>>>>>>>>>>>>>>>>>>>> IRQ:16 Endereço de E/S:0x2000 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> eth0:0 Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 1c:7e:e5:2d:2a:30 >>>>>>>>>>>>>>>>>>>>> inet end.: 192.168.3.7 Bcast:192.168.3.255 >>>>>>>>>>>>>>>>>>>>> Masc:255.255.255.0 >>>>>>>>>>>>>>>>>>>>> UP BROADCAST RUNNING PROMISC MULTICAST >>>>>>>>>>>>>>>>>>>>> MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> IRQ:16 Endereço de E/S:0x2000 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> eth0:3 Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 1c:7e:e5:2d:2a:30 >>>>>>>>>>>>>>>>>>>>> inet end.: 10.10.0.1 Bcast:10.10.0.255 >>>>>>>>>>>>>>>>>>>>> Masc:255.255.255.0 >>>>>>>>>>>>>>>>>>>>> UP BROADCAST RUNNING PROMISC MULTICAST >>>>>>>>>>>>>>>>>>>>> MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> IRQ:16 Endereço de E/S:0x2000 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> eth1 Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 38:60:77:60:b8:01 >>>>>>>>>>>>>>>>>>>>> inet end.: 10.3.77.51 Bcast:10.3.77.255 >>>>>>>>>>>>>>>>>>>>> Masc:255.255.255.0 >>>>>>>>>>>>>>>>>>>>> endereço inet6: fe80::3a60:77ff:fe60:b801/64 >>>>>>>>>>>>>>>>>>>>> Escopo:Link >>>>>>>>>>>>>>>>>>>>> UP BROADCAST RUNNING MULTICAST MTU:1500 >>>>>>>>>>>>>>>>>>>>> Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:2570320 erros:0 descartados:0 >>>>>>>>>>>>>>>>>>>>> excesso:0 quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:2584491 erros:0 descartados:0 >>>>>>>>>>>>>>>>>>>>> excesso:0 portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:1000 >>>>>>>>>>>>>>>>>>>>> RX bytes:2288274727 (2.2 GB) TX >>>>>>>>>>>>>>>>>>>>> bytes:2442811306 (2.4 GB) >>>>>>>>>>>>>>>>>>>>> IRQ:20 Memória:f7d00000-f7d20000 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> lo Link encap:Loopback Local >>>>>>>>>>>>>>>>>>>>> inet end.: 127.0.0.1 Masc:255.0.0.0 >>>>>>>>>>>>>>>>>>>>> endereço inet6: ::1/128 Escopo:Máquina >>>>>>>>>>>>>>>>>>>>> UP LOOPBACK RUNNING MTU:16436 Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:59988 erros:0 descartados:0 >>>>>>>>>>>>>>>>>>>>> excesso:0 quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:59988 erros:0 descartados:0 >>>>>>>>>>>>>>>>>>>>> excesso:0 portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:0 >>>>>>>>>>>>>>>>>>>>> RX bytes:5438912 (5.4 MB) TX bytes:5438912 >>>>>>>>>>>>>>>>>>>>> (5.4 MB) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> tap2fbf128b-58 Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 1a:06:78:7c:84:84 >>>>>>>>>>>>>>>>>>>>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:0 >>>>>>>>>>>>>>>>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> tapceb0ee10-34 Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> ee:5f:6c:80:ee:56 >>>>>>>>>>>>>>>>>>>>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:0 >>>>>>>>>>>>>>>>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> vboxnet0 Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 0a:00:27:00:00:00 >>>>>>>>>>>>>>>>>>>>> BROADCAST MULTICAST MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:1000 >>>>>>>>>>>>>>>>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> wlan0 Link encap:Ethernet Endereço de HW >>>>>>>>>>>>>>>>>>>>> 74:2f:68:64:f4:d8 >>>>>>>>>>>>>>>>>>>>> UP BROADCAST MULTICAST MTU:1500 Métrica:1 >>>>>>>>>>>>>>>>>>>>> pacotes RX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> quadro:0 >>>>>>>>>>>>>>>>>>>>> Pacotes TX:0 erros:0 descartados:0 excesso:0 >>>>>>>>>>>>>>>>>>>>> portadora:0 >>>>>>>>>>>>>>>>>>>>> colisões:0 txqueuelen:1000 >>>>>>>>>>>>>>>>>>>>> RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 2013/2/20 Guilherme Russi <[email protected]> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> quantum net-list >>>>>>>>>>>>>>>>>>>>>> [Errno 111] Connection refused >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I restarted the quantum-server service, but got the >>>>>>>>>>>>>>>>>>>>>> same error. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> 2013/2/20 Anil Vishnoi <[email protected]> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> i can't ignore that possibility. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Wed, Feb 20, 2013 at 10:48 PM, Anil Vishnoi >>>>>>>>>>>>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> can you fire 'quantum net-list' on your controller >>>>>>>>>>>>>>>>>>>>>>>> node and see if that's working. Also can you paste >>>>>>>>>>>>>>>>>>>>>>>> output of ovs-vsctl show >>>>>>>>>>>>>>>>>>>>>>>> and ifconfig. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Meanwhile you can restart nova-* services on the >>>>>>>>>>>>>>>>>>>>>>>> controller node and check if it fixes it. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Wed, Feb 20, 2013 at 10:25 PM, Guilherme Russi >>>>>>>>>>>>>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Hello Anil, >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> I've checked here, and the services are running >>>>>>>>>>>>>>>>>>>>>>>>> and the br-int, br-ex are up. Do you need any another >>>>>>>>>>>>>>>>>>>>>>>>> log? >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Guilherme. >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> 2013/2/20 Anil Vishnoi <[email protected]> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Guilherme, did you check that all your services >>>>>>>>>>>>>>>>>>>>>>>>>> are running properly and networking is up (br-int, >>>>>>>>>>>>>>>>>>>>>>>>>> br-ex) etc ? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Anil >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Feb 20, 2013 at 7:14 PM, Guilherme Russi >>>>>>>>>>>>>>>>>>>>>>>>>> <[email protected]> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Hello guys, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> I rebooted my Controller node and now I'm >>>>>>>>>>>>>>>>>>>>>>>>>>> getting this error: Network list can not be >>>>>>>>>>>>>>>>>>>>>>>>>>> retrieved. I'm using Folsom with >>>>>>>>>>>>>>>>>>>>>>>>>>> Quantum and here is the log showed at >>>>>>>>>>>>>>>>>>>>>>>>>>> /var/log/apache2/error.log >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] >>>>>>>>>>>>>>>>>>>>>>>>>>> \x1b[31;1mRecoverable error: [Errno 111] Connection >>>>>>>>>>>>>>>>>>>>>>>>>>> refused\x1b[0m >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] Traceback >>>>>>>>>>>>>>>>>>>>>>>>>>> (most recent call last): >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] File >>>>>>>>>>>>>>>>>>>>>>>>>>> "/usr/lib/python2.7/dist-packages/horizon/dashboards/syspanel/networks/views.py", >>>>>>>>>>>>>>>>>>>>>>>>>>> line 57, in get_data >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] networks = >>>>>>>>>>>>>>>>>>>>>>>>>>> api.quantum.network_list(self.request) >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] File >>>>>>>>>>>>>>>>>>>>>>>>>>> "/usr/lib/python2.7/dist-packages/horizon/api/quantum.py", >>>>>>>>>>>>>>>>>>>>>>>>>>> line 104, in >>>>>>>>>>>>>>>>>>>>>>>>>>> network_list >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] networks = >>>>>>>>>>>>>>>>>>>>>>>>>>> quantumclient(request).list_networks(**params).get('networks') >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] File >>>>>>>>>>>>>>>>>>>>>>>>>>> "/usr/lib/python2.7/dist-packages/quantumclient/v2_0/client.py", >>>>>>>>>>>>>>>>>>>>>>>>>>> line 102, >>>>>>>>>>>>>>>>>>>>>>>>>>> in with_params >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] ret = >>>>>>>>>>>>>>>>>>>>>>>>>>> self.function(instance, *args, **kwargs) >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] File >>>>>>>>>>>>>>>>>>>>>>>>>>> "/usr/lib/python2.7/dist-packages/quantumclient/v2_0/client.py", >>>>>>>>>>>>>>>>>>>>>>>>>>> line 244, >>>>>>>>>>>>>>>>>>>>>>>>>>> in list_networks >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] return >>>>>>>>>>>>>>>>>>>>>>>>>>> self.get(self.networks_path, params=_params) >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] File >>>>>>>>>>>>>>>>>>>>>>>>>>> "/usr/lib/python2.7/dist-packages/quantumclient/v2_0/client.py", >>>>>>>>>>>>>>>>>>>>>>>>>>> line 525, >>>>>>>>>>>>>>>>>>>>>>>>>>> in get >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] >>>>>>>>>>>>>>>>>>>>>>>>>>> headers=headers, params=params) >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] File >>>>>>>>>>>>>>>>>>>>>>>>>>> "/usr/lib/python2.7/dist-packages/quantumclient/v2_0/client.py", >>>>>>>>>>>>>>>>>>>>>>>>>>> line 510, >>>>>>>>>>>>>>>>>>>>>>>>>>> in retry_request >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] >>>>>>>>>>>>>>>>>>>>>>>>>>> headers=headers, params=params) >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] File >>>>>>>>>>>>>>>>>>>>>>>>>>> "/usr/lib/python2.7/dist-packages/quantumclient/v2_0/client.py", >>>>>>>>>>>>>>>>>>>>>>>>>>> line 455, >>>>>>>>>>>>>>>>>>>>>>>>>>> in do_request >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] >>>>>>>>>>>>>>>>>>>>>>>>>>> self._handle_fault_response(status_code, replybody) >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] File >>>>>>>>>>>>>>>>>>>>>>>>>>> "/usr/lib/python2.7/dist-packages/quantumclient/v2_0/client.py", >>>>>>>>>>>>>>>>>>>>>>>>>>> line 436, >>>>>>>>>>>>>>>>>>>>>>>>>>> in _handle_fault_response >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] >>>>>>>>>>>>>>>>>>>>>>>>>>> exception_handler_v20(status_code, des_error_body) >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] File >>>>>>>>>>>>>>>>>>>>>>>>>>> "/usr/lib/python2.7/dist-packages/quantumclient/v2_0/client.py", >>>>>>>>>>>>>>>>>>>>>>>>>>> line 82, in >>>>>>>>>>>>>>>>>>>>>>>>>>> exception_handler_v20 >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] >>>>>>>>>>>>>>>>>>>>>>>>>>> message=message) >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:00 2013] [error] >>>>>>>>>>>>>>>>>>>>>>>>>>> QuantumClientException: [Errno 111] Connection >>>>>>>>>>>>>>>>>>>>>>>>>>> refused >>>>>>>>>>>>>>>>>>>>>>>>>>> [Wed Feb 20 13:41:01 2013] [error] [client >>>>>>>>>>>>>>>>>>>>>>>>>>> 192.168.3.1] File does not exist: >>>>>>>>>>>>>>>>>>>>>>>>>>> /usr/share/openstack-dashboard/openstack_dashboard/static/dashboard/img/header_b.png, >>>>>>>>>>>>>>>>>>>>>>>>>>> referer: >>>>>>>>>>>>>>>>>>>>>>>>>>> http://192.168.3.1/static/ubuntu/css/ubuntu.css >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Any ideas what is wrong? >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Guilherme. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>>>>>>>>>>> Mailing list: https://launchpad.net/~openstack >>>>>>>>>>>>>>>>>>>>>>>>>>> Post to : [email protected] >>>>>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe : https://launchpad.net/~openstack >>>>>>>>>>>>>>>>>>>>>>>>>>> More help : https://help.launchpad.net/ListHelp >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>> Thanks & Regards >>>>>>>>>>>>>>>>>>>>>>>>>> --Anil Kumar Vishnoi >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> Thanks & Regards >>>>>>>>>>>>>>>>>>>>>>>> --Anil Kumar Vishnoi >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> Thanks & Regards >>>>>>>>>>>>>>>>>>>>>>> --Anil Kumar Vishnoi >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> Thanks & Regards >>>>>>>>>>>>>>>>>>>> --Anil Kumar Vishnoi >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> Thanks & Regards >>>>>>>>>>>>>>>>>> --Anil Kumar Vishnoi >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Thanks & Regards >>>>>>>>>>>>>>>> --Anil Kumar Vishnoi >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> Thanks & Regards >>>>>>>>>>>>> --Anil Kumar Vishnoi >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Thanks & Regards >>>>>>>>>>> --Anil Kumar Vishnoi >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Thanks & Regards >>>>>>>> --Anil Kumar Vishnoi >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Thanks & Regards >>>>>> --Anil Kumar Vishnoi >>>>> >>>>> >>>> >>>> >>>> >>>> -- >>>> Thanks >>>> Anil >>> >>> >>> >>> _______________________________________________ >>> Mailing list: https://launchpad.net/~openstack >>> Post to : [email protected] >>> Unsubscribe : https://launchpad.net/~openstack >>> More help : https://help.launchpad.net/ListHelp >>> >> >> >> >> -- >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> Dan Wendlandt >> Nicira, Inc: www.nicira.com >> twitter: danwendlandt >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > _______________________________________________ > Mailing list: https://launchpad.net/~openstack > Post to : [email protected] > Unsubscribe : https://launchpad.net/~openstack > More help : https://help.launchpad.net/ListHelp > _______________________________________________ Mailing list: https://launchpad.net/~openstack Post to : [email protected] Unsubscribe : https://launchpad.net/~openstack More help : https://help.launchpad.net/ListHelp
