Hello again Razique, I've found the problem, I need to add the grants on the mysql to my another IP. Now it's working really good :D I've found this link too if someone needs: http://docs.openstack.org/admin-guide-cloud/content//managing-volumes.html
Thank you so much, and if you need me just let me know. Best regards. Guilherme. 2013/11/8 Guilherme Russi <[email protected]> > Hello Razique, I got a couple of doubts, do you know if I need to do > something else that's is not on the link you sent me? I'm asking because I > followed the configuration but it's not working, here is what I get: I've > installed the cinder-volume at the second computer that have the HD, and > I've changed it's cinder.conf. I've changed too the master's cinder.conf > like is following: > > > [DEFAULT] > rootwrap_config = /etc/cinder/rootwrap.conf > sql_connection = mysql://cinder:password@localhost/cinder > api_paste_confg = /etc/cinder/api-paste.ini > #iscsi_helper=iscsiadm > #iscsi_helper = ietadm > iscsi_helper = tgtadm > volume_name_template = volume-%s > #volume_group = cinder-volumes > verbose = True > auth_strategy = keystone > iscsi_ip_address = 192.168.3.1 > scheduler_driver=cinder.scheduler.filter_scheduler.FilterScheduler > > # Rabbit authorization > rabbit_host = localhost > rabbit_port = 5672 > rabbit_hosts = $rabbit_host:$rabbit_port > rabbit_use_ssl = false > rabbit_userid = guest > rabbit_password = password > #rabbit_virtual_host = /nova > > state_path = /var/lib/cinder > lock_path = /var/lock/cinder > volumes_dir = /var/lib/cinder/volumes > #rpc_backend = cinder.rpc.impl_kombu > > enabled_backends=orion-1,orion-4 > [orion-1] > volume_group=cinder-volumes > volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver > volume_backend_name=LVM_iSCSI > [orion-4] > volume_group=cinder-volumes-2 > volume_driver=cinder.volume.drivers.lvm.LVMISCSIDriver > volume_backend_name=LVM_iSCSI > > The cinder.conf on the second computer is like this but the IPs are > changed with the controller IP (It has the cinder-api), and when I run > service cinder-volume restart at the second computer it's status is > stop/waiting. > > Any ideas? > > Thanks :) > > > 2013/11/8 Razique Mahroua <[email protected]> > >> sure :) >> >> On 08 Nov 2013, at 05:39, Guilherme Russi <[email protected]> >> wrote: >> >> Oh great! I'll try here and send you the results. >> >> Very thanks :) >> >> >> 2013/11/8 Razique Mahroua <[email protected]> >> >>> If I’m not mistaken, you only need to install the “cinder-volume’ >>> service that will update its status to your main node >>> :) >>> >>> On 08 Nov 2013, at 05:34, Guilherme Russi <[email protected]> >>> wrote: >>> >>> Great! I was reading the link and I have one question, do I need to >>> install cinder at the other computer too? >>> >>> Thanks :) >>> >>> >>> 2013/11/8 Razique Mahroua <[email protected]> >>> >>>> Ok in that case, with Grizzly you can use the “multi-backends” feature: >>>> https://wiki.openstack.org/wiki/Cinder-multi-backend >>>> >>>> and that should do it :) >>>> >>>> On 08 Nov 2013, at 05:29, Guilherme Russi <[email protected]> >>>> wrote: >>>> >>>> It is a hard disk, my scenario is one Controller (where I have my >>>> storage cinder and my network quantum) and four compute nodes. >>>> >>>> >>>> 2013/11/8 Razique Mahroua <[email protected]> >>>> >>>>> ok ! >>>>> what is your actual Cinder backend? Is it a hard disk, a SAN, a >>>>> network volume, etc… >>>>> >>>>> On 08 Nov 2013, at 05:20, Guilherme Russi <[email protected]> >>>>> wrote: >>>>> >>>>> Hi Razique, thank you for answering, I want to expand my cinder >>>>> storage, is it the block storage? I'll use the storage to allow VMs to >>>>> have >>>>> more hard disk space. >>>>> >>>>> Regards. >>>>> >>>>> Guilherme. >>>>> >>>>> >>>>> >>>>> 2013/11/8 Razique Mahroua <[email protected]> >>>>> >>>>>> Hi Guilherme ! >>>>>> Which storage do you precisely want to expand? >>>>>> >>>>>> Regards, >>>>>> Razique >>>>>> >>>>>> >>>>>> On 08 Nov 2013, at 04:52, Guilherme Russi <[email protected]> >>>>>> wrote: >>>>>> >>>>>> > Hello guys, I have a Grizzly deployment running fine with 5 nodes, >>>>>> and I want to add more storage on it. My question is, can I install a new >>>>>> HD on another computer thats not the controller and link this HD with my >>>>>> cinder that it can be a storage too? >>>>>> > The computer I will install my new HD is at the same network as my >>>>>> cloud is. I'm asking because I haven't seen a question like that here. >>>>>> Does >>>>>> anybody knows how to do that? Have a clue? Any help is welcome. >>>>>> > >>>>>> > Thank you all. >>>>>> > >>>>>> > Best regards. >>>>>> > _______________________________________________ >>>>>> > Mailing list: >>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>> > Post to : [email protected] >>>>>> > Unsubscribe : >>>>>> http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> >
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : [email protected] Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
