My question arises from our switch to dedicated SSD servers for our container servers.
When first creating the shard number there were 23*12 so I set the partition to 15. Now I'm replacing container services on these disk with 4 hosts that a have a single, fast SSD. However I realize that the shard count is completely different now. I originally used a partition value of 15 but this now seems much to high for 4 servers with only disk each. Can anyone advice on the best way to go about this? Can I dynamically adjust the partition values after the swift ring has been created? Or should I just take the disks on my 4 SSD hosts and put their weight as 2^15 / 4 so the overall shard count stays the same? Thanks again in advice for all the help I get here. This list is incredible. -- Stephen Wood www.heystephenwood.com
_______________________________________________ Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack Post to : [email protected] Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
