Hello All,
I have configured Havana set up on Ubuntu 12.04 with Ceilometer.

Ceilometer is not producing any alarm even though condition is met , Below is 
the detail

root@controller:/var/log/ceilometer# ceilometer alarm-threshold-create --name 
cpuutlization --project-id 536518d5b38d4f3e9dcab26403d4d6e8 --user-id admin 
--description Threshholdvalue --state alarm --enabled True --alarm-action 
'log://' --meter-name cpu --period 60 --evaluation-periods 1  --statistic avg 
--comparison-operator 'gt' --threshold 30 --repeat-actions True
+---------------------------+------------------------------------------------------------------+
| Property                  | Value                                             
               |
+---------------------------+------------------------------------------------------------------+
| alarm_actions             | [u'log://']                                       
               |
| user_id                   | admin                                             
               |
| name                      | cpuutlization                                     
               |
| enabled                   | True                                              
               |
| rule                      | {u'meter_name': u'cpu', u'evaluation_periods': 1, 
u'period': 60, |
|                           | u'statistic': u'avg', u'threshold': 30.0, 
u'query': [],          |
|                           | u'comparison_operator': u'gt'}                    
               |
| alarm_id                  | eb56440e-2510-4be3-80b6-dfbd7262cfb2              
               |
| state                     | alarm                                             
               |
| insufficient_data_actions | []                                                
               |
| repeat_actions            | True                                              
               |
| ok_actions                | []                                                
               |
| project_id                | 536518d5b38d4f3e9dcab26403d4d6e8                  
               |
| type                      | threshold                                         
               |
| description               | Threshholdvalue                                   
               |
+---------------------------+------------------------------------------------------------------+

I launched my stack and using stress command I increased cpu load , according 
to above condition once my condition met there should be some logs in my  
ceilometer-alarm-evaluator.log ceilometer-alarm-notifier.log ...but nothing is 
there in my log ..

Is there any addition configurations need to be done ..?

Regards,
Malleshi C N

________________________________

This message is for the designated recipient only and may contain privileged, 
proprietary, or otherwise confidential information. If you have received it in 
error, please notify the sender immediately and delete the original. Any other 
use of the e-mail by you is prohibited. Where allowed by local law, electronic 
communications with Accenture and its affiliates, including e-mail and instant 
messaging (including content), may be scanned by our systems for the purposes 
of information security and assessment of internal compliance with Accenture 
policy.
______________________________________________________________________________________

www.accenture.com
_______________________________________________
Mailing list: http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack
Post to     : [email protected]
Unsubscribe : http://lists.openstack.org/cgi-bin/mailman/listinfo/openstack

Reply via email to